Shop by Mustang Vendor
Mustang Gift Cards

COMP Cams Camshaft Magnum 284HR Retro-Fit Hydraulic Roller 2500-6000 RPM Carbureted 289/302

Part Number:
314428
$397.04
$294.99
$102.05 (26%)
EARN 294 RPM CLUB POINTS
Quantity:
Ships from Manufacturer
Item will ship directly from the manufacturer.
Free Shipping on Mustang Parts
1964-1973 Mustang Parts
1979-1993 Mustang Parts
1994-2004 Mustang Parts
2005-2009 Mustang Parts
2010-2014 Mustang Parts

Mustang COMP Cams Camshaft Magnum 284HR Retro-Fit Hydraulic Roller 2500-6000 RPM Carbureted 289/302

Vendor Part Number: 31-442-8
COMP Cams Magnum 284HR Retro-Fit Hydraulic Roller Camshaft with a 2500 to 6000 RPM Range for Mustangs with a Carbureted 289 or 302 Engine.

Available with camshaft only, camshaft and lifers, small kit or complete kit.

This retro-fit hydraulic roller camshaft will fit Ford 289 and 302 engines from 1963-1995 that did not come from the factory with hydraulic roller cams.

Magnum camshafts generate great high RPM power. They can be used with mild ratio rocker arms and traditional performance valve springs as they are easy on valve train parts. These camshafts generally like compression ratios of 9.5:1 and higher. A torque converter and gear change is usually required. The larger Magnum cams are a little lazy at low RPMs.

The Magnum 284HR camshaft is intended for Street Machines and limited high performance street use. It's best suited for cars equipped with a 4-speed transmission and 3.40-4.10 gears. Additional modifications with this camshaft would be an aftermarket intake and headers.

Camshaft Specifications:
- RPM Range: 2500 to 6000
- Valve Timing: 0.006
- Lobe separation (degrees): 110
- Intake Centerline (degrees): 106
- Valve Lash: Hydraulic
- Duration: Intake 284/Exhaust 284
- Duration @ .050” Lift: Intake 224/Exhaust 224
- Valve Lift: Intake 0.533/Exhaust 0.533
- Lobe Lift: Intake 0.333/Exhaust 0.333

Options Include:
- Camshaft (314428) Only
- Camshaft (314428) and Lifters
- Small Kit - Camshaft (314428), Lifters, Timing Chain Set and Assembly Lube
- Complete Kit - Everything in Small Kit plus Valve Springs, Valve Spring Retainers, Valve Locks and Valve Stem Seals

*This camshaft can only be used in 289 and 302 engines, not 302 H.O. blocks due to base circle size.
*Not for electronic fuel injection.
Mustang Parts Vendor

Customer Review Summary

Mustang COMP Cams Camshaft Magnum 284HR Retro-Fit Hydraulic Roller 2500-6000 RPM Carbureted 289/302

Vendor Part Number: 31-442-8

Fits these Ford Mustangs:

  • 1964.5
  • 1965
  • 1966
  • 1967
  • 1968
  • 1969
  • 1970
  • 1971
  • 1972
  • 1973
  • 1974
  • 1975
  • 1976
  • 1977
  • 1978
  • 1979
  • 1980
  • 1981
  • 1982
  • 1983
  • 1984
  • 1985

More Mustang Parts From:

Related 1964-1973 Mustang Parts Categories:

Related 1979-1993 Mustang Parts Categories:

Related 1994-2004 Mustang Parts Categories:

Related 2005-2009 Mustang Parts Categories:

Related 2010-2014 Mustang Parts Categories: