AMK Products Master Chassis Kit With Drum Brakes 289 1966

AMK Products: 66Z-DRSB
CJ's Low Price:
$291.99
In StockOrders placed today will ship tomorrow1410998400
Earn 291 RPM Points What's this?
MCK2

Product Description

AMK Products Master Chassis Kit for 1966 Mustangs with a 289 Engine and Drum Brakes.

This Master Chassis Kit from AMK Products includes 329 total pieces of factory correct, OE style fasteners that are required to properly reassemble your 1966 Mustang's chassis in one convenient kit! The kit is specifically assembled for 1966 Mustangs with a 289 engine and drum brakes.

AMK Products' Master Chassis Kit includes individually packaged sets of hardware for various applications on your 1966 Mustang. Each package is thoroughly labeled so you know exactly where it goes on your Mustang. The individual sets of hardware also include the total number of pieces that are required for the specific application.

Master Chassis Kit Includes:
- Accelerator Bellcrank to Firewall: Hex Washer Head Sheet Metal Screws (3)
- Axle Housing to Springs: 5" U-Bolts, Flange Nuts (12)
- Axle Retainer Plates: T-Bolts, Lock Nuts (16)
- Front Drum Brake Assembly to Spindle: T-Bolts, Lock Nuts (16)
- Brake Cables to Body: Hex Washer Head Sheet Metal Screws, Retainers, Nut (8)
- Brake Drum Retainers: Green Push-On Retainers (6)
- Front Brake Hose Brackets to Body: Hex Head Heavy-Duty Machine Screws (2)
- Brake Hoses to Bracket: U-Clips (3)
- Brake Light Switch: Retaining Pin (1)
- Coil Spring Perches: 3/8"-24 Marsden Hex Nuts (4)
- Lower Control Arms to Shock Tower: Hex Bolts, Nuts, Split Washers (6)
- Upper Control Arms to Shock Tower: Grade-8 1/2"-20 Knurled Bolts, Flange Nuts (8)
- Front Tubular Crossmember: Special Hex Countersunk Bolts (2)
- Differential Carrier to Housing: Cadmium Lock Nuts, Copper Washers (20)
- Distribution Block to Apron: Hex Machine Screw (1)
- Driveshaft: 5/16" U-Bolts, Lock Nuts (6)
- Engine Body Brackets: Flange Bolts and Nuts (12)
- Engine Insulator to Block: Hex Bolts, Split Washers (8)
- Engine Insulator to Body Brackets: 4-3/4" Bolts, Flange Nuts, Flat Washers (6)
- Single Exhaust Hanger: Hex Machine Screws (6)
- Gas Tank: Hex Washer Head Sheet Metal Screws (11)
- Gas Tank Filler Neck with Twist Cap: Hex Washer Head Sheet Metal Screws (5)
- Chassis Grease Plugs: Hex Plugs (9)
- Idler Arm: Hex Bolts "F", Lock Nuts, Clipped Washers (6)
- Front Eye Leaf Springs: Pointed Hex Bolts, Flange Nuts, Washers (6)
- Master Cylinder without Power Brakes: Hex Screw and Split Washer Assembly (2)
- Power Steering Cylinder Bracket to Body: Hex Bolts "F", Hex Nuts, Washers (8)
- Power Steering Hose Support Insulator Retainer: Hex Washer Head Machine Screw (1)
- Parking Brake Control to Body: Phillips Pan Head Screw/External Tooth Washer Assembly, Caged/Lock Nuts (8)
- Pitman Arm to Gear Box with 1.0" Shaft: 1-1/8" Hex Jam Nut, Split Washer (2)
- Rear Shackle Assembly: Marsden Hex Nuts (4)
- Front Shock Brackets: Lower Heavy-Duty Carriage Bolts, External Nut and Washer Assembly (12)
- Front Shocks: External Hex Screw/Washer Assembly "SEMS", Lock Nuts, Washers (12)
- Front Stabilizer Bar to Body: Hex Bolts, Lock Nuts (8)
- Front Stabilizer End Links: Bolts, Retainers, Bushings, Spacers, Nuts (22)
- Steering Gear Box: Hex Bolts, Clipped Flat and Split Washers (9)
- Steering Linkage with Power Steering: Slotted Nuts, Cotter Pins, Flat Washer (25)
- Strut Rods to Lower Control Arm: Hex Bolts, Lock Nuts (8)
- Rear Suspension Bumper: Hex Screws (2)
- Transmission Crossmember: Piloted Flange Bolts, Lock Nuts, Washer (5)
- Transmission Insulator: (10)
- Wheel Cylinders: 5/16"-18 Hex Screw and External Tooth Washer Assembly (8)

Buying individual sets of hardware for your 1966 Mustang can be expensive and time consuming if you're not sure which hardware you need. This Master Chassis Kit makes it easy by including 85% of the original, factory correct hardware that specifically fits your 1966 Mustang with a 289 engine and drum brakes. With a Master Chassis Kit from AMK Products, you will not only save time and money, but you will have the confidence knowing your 1966 Mustang is going to be restored with the finest factory correct hardware on the market.

AMK Products produces the most factory correct hardware for your classic Mustang. No matter what kind of Mustang you're building, there's no company better for nuts and bolts than AMK Products!

Similar Mustang Parts

similar mustang parts More Mustang Suspension Hardware  

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a Review