PA Performance High Torque Mini Starter Manual Transmission 289/302/351 1965-1973

PA Performance: 1881
CJ's Low Price:
1432771200 31432
Earn 149 RPM Points What's this?
PA Performance High Torque Mini Starter Manual Transmission 289/302/351 1965-1973

Product Description

PA Performance High Torque Mini Starter for 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972 and 1973 Mustangs with a Manual Transmission.

If you've increased the compression of your engine or need a replacement alternator, PA Performance's High Torque Mini Starter for 1965-1973 Mustangs with a manual transmission is the perfect choice. The High Torque Mini Starter offers better torque, requires less cranking amps and weighs much less than the factory starter. Never worry about being stranded in a parking lot unable to start your engine.

This Ford Style Mini Starter is an upgrade for most applications prior to or near 1993. The PA Performance High Torque Mini Starter works well on higher compression engines up to 12.0:1 compression. The starter's very small size increases header clearance and reduces the effects of "hot start". Early factory field wound starters weigh around 18 lbs. The mini starters weigh in at 8-1/2 lbs which is over 50% less than the factory starter! Even with the small package, the starter packs a bigger punch and requires less cranking amps.

Includes the conversion wire kit for “Upgrade Applications” but it is not used with “Direct Replacement” applications. This unit is smaller than the early starters and the same size but with a stronger output compared to the newer (early 1990s') starters.

All starters are 100% new, tested prior to shipping.

*Will NOT fit Mustangs with an automatic transmission.

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a review
PA Performance High Torque Mini Starter Manual Transmission 289/302/351 1965-1973 is rated 3.0 out of 5 by 2.
Rated 1 out of 5 by from Did not grab the 157 tooth flywheel I purchased this for my 66 GT with the factory T-10 4 speed, factory bellhousing and factory 157 tooth flywheel. The teeth on my original ford starter had 10 teeth, this starter had only 9 teeth, and when engaged, did not grab the flywheel and grinded. I checked to make sure all was flushly mounted and properly tightened. Everything was. Its well manufactured, just didn't fit my specific combo, thankfully CJ allowed me to return this starter with no hickups.
Date published: 2015-04-27
Rated 5 out of 5 by from Wonderful starter I and previously bought a different starter and then ode turned out to Be to long. Bought this one and instead and was a perfect fit! Turns the motor over effortlessly!
Date published: 2015-01-08
  • 2015-05-27T09:33CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_US, sid_STR1881, PRD, sort_relevancy
  • clientName_cjponyparts

Product Questions


You Might Also Like