Pair of 3d Carbon Headlight Splitters for 2005-2009 V6/GT Mustangs.These headlight splitters from 3d Carbon are manufactured in flexible high pressure injected urethane. Attaches with double faced tape. Available unpainted or pre-painted in any 2005-2009 factory paint color. Unpainted version will require prepping, priming and painting prior to installation.
*Will not fit 2007-2009 Shelby GT500s.
Product ReviewsWrite a review
3dCarbon Headlight Splitter Tungsten Gray Pair V6/GT 2005-2009 is rated out of 5 by 1.
Rated 4 out of 5 by UKnobby from Check your car first I bought these splitters in Tungsten Grey and the paint match to an old 2006 mustang was very good. My only problem was withnthe fitting, it looks like maybe my car has had a front end shunt at sone point in its life and the front of the headlight is not flush with the bumper cover/grille bodywork. Loosened all the fixing bolts on both and pulled and pushed where possible to no avail. I have had to modify the end of the splitter to get it to fit flat, losing a little of the painted finish in the process. When fitted, they look awesome, just be aware that you may have to work at it a little.
Date published: 2016-01-02