5 Leaf Spring Kit for all 1967-1968 Mustangs.Upgrade the handling performance of your Mustang with these high-performance 5-leaf rear springs. They offer superior road handling over stock, 4-leaf designs. These springs also help prevent wheel hop and spring wrap up on hard acceleration. Painted steel-gray to closely resemble OEM appearance, and to provide a nice contrast compared to traditional black replacements. 195 lb load rate.
Kit includes 5 leaf rear springs, rear shackles, front spring bolts and U bolts.
Product ReviewsWrite a review
Leaf Spring Kit 5-Leaf 1967-1968 is rated out of 5 by 5.
Rated 5 out of 5 by Nfrutiger from Great fit Ok kit fits great as always just save your front through bolt the new bolts treads don't run down the bolt far enough to tighten the spring in
Date published: 2016-09-14
Rated 5 out of 5 by Milit73 from Leaf Springs Great fit and look good!!!! Added a little height in the back which is what I wanted
Date published: 2015-09-22
Rated 5 out of 5 by Nfrutiger7 from Excellent upgrade I bought this put it into my head 1968 really helped the old springs were tired only problem is the threw bolt for the front of the spring is to big so save your original bolts
Date published: 2015-06-27
Rated 5 out of 5 by Seagirl244 from Great service Order was shipped immediately, had everything in less than a week.
Date published: 2015-05-30
Rated 4 out of 5 by Lesjr67 from 5 leaf spring Good price for correct springs! Look like factory correct items!
Date published: 2016-01-05
I have a 68 cougar and these springs are shorter than what came out. Will these work? Do I need anything else for this kit?
The old springs could be worn out and it would appear that they are longer because they lost their arch, you shouldn't need anything else.
Date published: 2016-10-03
Are there any pictures of ride high to with these installed? Mine are worn out and the back fenders are about flush with the top of the tires (17" wheels)
These would sit at the factory ride height.
Date published: 2016-09-22
Need to raise the back end as high as possible. I would also like some rear shackles that are a little longer than stock. Are there any rear leafs that will increase my back end higher than than these leafs.
We do not offer any leaf springs that will raise the rear, we offer shackles that will raise the rear 3/8 of an inch part #RSK4.
Date published: 2015-11-20
Does the kit come with the correct size u-bolts for my 9 inch rear end?
Yes they should fit.
Date published: 2015-12-15
What is the width, and the distance from eye center to eye center, and the curve offset?
Unfortunately, those dimensions aren't available.
Date published: 2015-09-28
You Might Also Like