AMK Products Idler Arm Mount Kit for all 1968 Mustangs.
If you need to refresh and replace the hardware in your 1968 Mustang’s steering system, this is a great option for changing out the old hardware holding your idler arm in place. This AMK Products Idler Arm Mounting Kit consists of 6 pieces and mounts the idler arm to the frame rail. This hardware is resilient and reliable, a great answer for old rusted and busted hardware. Pick this kit up today from CJ Pony Parts and make sure your idler arm is secured to the frame rail of your Mustang correctly and securely.
AMK Products Idler Arm Mounting Kit Includes:
- (2) Bolts
- (2) Nuts
- (2) Washers
This AMK Products Idler Arm Mounting Kit has two washers, two nuts and two bolts; everything you need to properly and securely attach your Mustang’s idler arm to the frame rail of the vehicle. If you are looking for reliable hardware, this is great for mounting the idler arm in any 1968 Mustang. If your original hardware is damaged the effects loose or breaking connections can have on your Mustang can be detrimental, so it's a good idea to replace these components before severe damage occurs.
You can buy dozens of new parts for your Mustang. However, many of these new parts won't come with the appropriate hardware, or will expect you to reuse your old, rusted out hardware pieces. Well, if you're in either situation, the wide selection of AMK Products offered by CJ Pony Parts can fill the void and easily allow you to install your new Mustang parts with fresh, shiny, new hardware.
Order this replacement AMK Products F-1323 Idler Arm Mount Kit for your classic 1968 Mustang today from CJ Pony Parts!
Product ReviewsWrite a review
You Might Also Like