AMK Products Master Chassis Kit With Disc Brakes 302/351 1971-1973

AMK Products: 71Z-DCSB
MSRP: $332.65
CJ's Low Price:
$316.99
Ships in 5-7 Days This item typically ships within 5-7 days1406764800
Earn 316 RPM Points What's this?
AMK Products Master Chassis Kit With Disc Brakes 302/351 1971-1973

Product Description

AMK Products Master Chassis Kit for 1971, 1972 and 1973 Mustangs with a 302 or 351 Engine and Front Disc Brakes.

This Master Chassis Kit from AMK Products includes 311 total pieces of factory correct, OE style fasteners that are required to properly reassemble your 1971-1973 Mustang's chassis in one convenient kit! This kit is specifically assembled for 1971-1973 Mustangs equipped with a 302 or 351 engine and front disc brakes.

AMK Products' Master Chassis Kit includes individually packaged sets of hardware for various applications on your 1971-1973 Mustang. Each package is thoroughly labeled so you know exactly where it goes on your Mustang. The individual sets of hardware also include the total number of pieces that are required for the specific application.

Master Chassis Kit Includes:
- Accelerator Bellcrank to Firewall: Hex Washer Head Sheet Metal Screws, Serrated Flange Nuts (6)
- Axle Housing to Springs: 5-3/4" U-Bolts, Flange Nuts (12)
- Axle Retainer Plates: T-Bolts, Lock Nuts (16)
- Brake Booster to Firewall: Flange Nuts (4)
- Brake Cables to Body: Retaining Clips, Hex Nuts (6)
- Brake Calipers to Spindle: Drilled Grade-8 Bolts, Split Washers (8)
- Brake Drum Retainers: Green Push-On Retainers (6)
- Front Disc Brake Hoses to Body: Hex Washer Head Machine Screws, U-Clip (5)
- Brake Light Switch: Retaining Pin (1)
- Brake Pedal to Firewall: Flange Nuts (4)
- Brake Rotor Shields: Hex Screw and External Tooth Washer Assembly (6)
- Coil Spring Perches: Lock Nuts (4)
- Lower Control Arms to Shock Tower: Grade-8 Cam Bolts, Red Nuts, Washers (8)
- Upper Control Arms to Shock Tower: Grade-8 1/2"-13 Knurled Bolts, Red Nuts (12)
- Differential Carrier to Housing: Red Lock Nuts, Copper Washers (20)
- Driveshaft: 5/16" U-Bolts, Lock Nuts (6)
- Engine Insulator to Block: Special Flange Bolts (4)
- Engine Insulator to Body Brackets: 4-3/8" Unified Bearing Stress Flange Bolts/Nuts (4)
- Engine Mounts to Body: Unified Bearing Stress Flange Bolts and Nuts (16)
- Dual Exhaust Hangers: Hex Washer Head Machine Screws (12)
- Fuel Vapor Storage Canister: External Nut and Washer Assembly (3)
- Gas Tank: Carriage Bolts, Flange Nuts (4)
- Gas Tank Filler Neck Seal: Phillips Pan Head Sheet Metal Screws (4)
- Gas Tank Filler Neck with Twist Cap: Hex Washer Head Sheet Metal Screws (5)
- Chassis Grease Plugs: Hex Plugs (9)
- Idler Arm: Hex Bolts, Lock Nuts, Clipped Washers (6)
- Front Eye Leaf Springs: Flange Bolts and Nuts (4)
- Master Cylinder with Power Brakes: Flange Nuts (2)
- Parking Brake Control to Body: Hex Washer Head Serrated Screws (3)
- Pitman Arm to Gear Box: Hex Jam Nut, Split Washer (2)
- Proportioning Valve to Apron: Unified Bearing Stress Flange Nuts (2)
- Front Shock Brackets: Lower Heavy-Duty Carriage Bolts, Flange Nuts (12)
- Front Stabilizer Bar to Body: Hex Screw and Conical Spring Washer Assembly, Lock Nuts (8)
- Front Stabilizer End Links: Bolts, Retainers, Bushings, Spacers, Nuts (22)
- Rear Stabilzer Bar to Body: Hex Washer Head Screws (4)
- Steering Gear Box: Hex Bolts, Flat Washers (6)
- Steering Linkage: Slotted Nuts, Cotter Pins (21)
- Steering Rag Joint: 12-Point Bolt, 5/16"-18 Lock Nuts (3)
- Strut Rod Threaded Ends to Body: Lock Nuts (4)
- Strut Rods to Lower Control Arm: 1/2"-13 Special Knurled Bolts, Nuts, Pins (12)
- Rear Suspension Bumper: Lock Nut (1)
- Transmission Crossmember: Unified Bearing Stress Flange Bolts and Nuts (4)
- Transmission Insulator: Hex Bolts, Flange Nuts, Split Washers (6)
- Wheel Cylinders: 5/16"-18 Hex Screw and External Tooth Washer Assembly (4)

Buying individual sets of hardware for your 1971-1973 Mustang can be expensive and time consuming if you're not sure which hardware you need. This Master Chassis Kit makes it easy by including 85% of the original, factory correct hardware that specifically fits your 1971-1973 Mustang with a 302 or 351 engine and front disc brakes. With a Master Chassis Kit from AMK Products, you will not only save time and money, but you will have the confidence knowing your 1971-1973 Mustang is going to be restored with the finest factory correct hardware on the market.

AMK Products produces the most factory correct hardware for your classic Mustang. No matter what kind of Mustang you're building, there's no company better for nuts and bolts than AMK Products!

Similar Mustang Parts

similar mustang parts More Mustang Suspension Hardware  

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a Review