AMK Products Underhood Detailing Kit for all 1973 Mustangs.This Underhood Detailing Kit from AMK Products includes 125 total pieces of original style, factory correct fasteners that are intended to substantially improve the overall underhood appearance of your assembled 1973 Mustang in one convenient kit! If your newly restored 1973 Mustang is suffering from incorrect or unsightly mounting hardware under the hood, this kit is a must have for that final touch.
AMK Products' Underhood Detailing Kit includes individually packaged sets of hardware for numerous parts under the hood of your 1973 Mustang. Each package of hardware is thoroughly labeled so you know exactly where it goes on your Mustang. The individual sets of hardware also include the total number of pieces that are required for the specific application. This kit will work on all 1973 Mustangs.
Underhood Detailing Kit Includes:
- Air Cleaner Snorkel: Hex Washer Head Screws (2)
- Battery Hold Down Clamp: J-Hooks, Hex Screw/Conical Spring Washer Assembly, Flange Nuts (5)
- Brake Booster Hose: Black Flat Wound Spring Clamps (2)
- Cowl Braces to Cowl: Hex Screw/Conical Spring Washer Assembly, Flange Nuts (8)
- Fender Tops Only "FLAG": Hex Screw/Conical Spring Washer Assembly (12)
- Front Shock Brackets: Lower Heavy Duty Carriage Bolts, Lock Nuts (12)
- Grille and Center Support: Hex Screw/Conical Spring Washer Assembly, Phillips Pan Head Screws, Nuts (14)
- Heater Assembly to Firewall: Stamped Nuts, Sealer Washers (4)
- Hood and Hinges: Hex Screw/Conical Spring Washer Assembly, U-Nuts (16)
- Hood Latch and Catch: Hex Screw and Conical Spring/Square Washer Assembly, U-Nuts (6)
- Hood Latch Support: Special Hex Screw/Square Coned Washer Assembly, U-Nuts (5)
- Horns: Hex Screw/Conical Washer Assembly (2)
- Radiator Fan Guard: Hex Washer Head Sheet Metal Screws (2)
- Radio Hood Ground: Hex Washer Head Sheet Metal Screw (1)
- Shock Tower Braces: Hex Screw/Square Coned Washer Assembly, Nuts (20)
- Starter Solenoid: Hex Washer Head Sheet Metal Screws "D" (2)
- Voltage Regulator: Hex Washer Head Sheet Metal Screws "D", External Washer (3)
- Washer Nozzles: Phillips Pan Head Sheet Metal Screws (2)
- Windshield Washer Bottle: Hex Washer Head Sheet Metal Screw/Flat Washer Assembly (2)
- Windshield Wiper Motor: Unified Bearing Stress Flange Bolts (3)
Buying individual sets of hardware for under the hood of your 1973 Mustang can be expensive and time consuming if you're not sure which hardware you need. This Underhood Detailing Kit makes it easy by including factory correct fasteners that specifically fit your 1973 Mustang. With an Underhood Detailing Kit from AMK Products, you will not only save time and money, but you will have the confidence knowing that the parts under the hood of your 1973 Mustang will be fastened or assembled with the finest hardware on the market.
AMK Products produces the most factory correct hardware for your classic Mustang. No matter what kind of Mustang you're building, there's no company better for nuts and bolts than AMK Products!
Similar Mustang PartsMore Mustang Engine Hardware
This product will fit the following Ford Mustang years:
Product ReviewsWrite a review
You Might Also Like
CJ's Low Price:$319.99
CJ's Low Price:$299.99
CJ's Low Price:$314.99
CJ's Low Price:$299.99