BMR Panhard Bar Tubular Adjustable With Polyurethane Bushings Black Hammertone 2005-2014

BMR: PHR006H
MSRP: $154.99
CJ's Low Price:
$144.99
In Stock
Free Same Day Shipping
Orders placed by 5:00PM Eastern time ship today1413936000
Earn 144 RPM Points What's this?
PHB5
PHB5 Play BMR Panhard Bar Tubular Adjustable With Polyurethane Bushings Black Hammertone 2005-2014 Video 1 Play BMR Panhard Bar Tubular Adjustable With Polyurethane Bushings Black Hammertone 2005-2014 Video 3

Product Description

BMR Tubular Adjustable Panhard Bar with Polyurethane Bushings for all 2005-2014 Mustangs.

The panhard bar is responsible for locating the rear end side-to-side in the chassis. Factory panhard bars are made with small diameter tubing and rubber bushings that allow deflection under load.

BMR panhard bars are all made from larger diameter 1.25", heavy wall DOM tubing and utilize either greaseable polyurethane bushings or HD spherical bearings by QA1. The adjustable versions use left-hand and right-hand thread to allow easy "on-car" adjustment. The CNC machined adjusters are made from 4130 chrom-moly and have rolled threads. All rod end spacers are 304 stainless. You won't find better quality pieces.

By nature, a panhard bar will alter rear end position as ride height changes. This makes it necessary to use an adjustable panhard bar when lowering your vehicle as it allows you to re-center the rear end. Adjustable panhard bars also become a "must-have" part if you are trying to fit the widest tires possible in the wheel well.

Available in your choice of a black hammertone or red powdercoated finish.

Product Reviews

Write a Review
Easy To Adjust On Car
Installed this product and adjustments were easy ... fixed the misalignment after lowering my S197. BMR makes very good products, keep the bushing greased and it will last for a long time. While you have the bar out, consider doing the support bracket at the same time, especially if going with red BMR parts, looks awesome!!
Bill June 30, 2012
The best bar, trust me.
If you're not happy with the look of your rear tires sticking out on one side more than the other or are going to lower your Mustang this is by far the easiest adjustable panhard bar with exceptional quality around. This bar has greaseable polyurethane bushings and the bar is actuality quieter on the road than even the stock bar. The driver side bushing is a bit tight but well worth any extra time you may have to spend shaving the side of the bushing. DO NOT GET A BAR WITH SPERICAL BUSHINGS, they get very noisey and it doesn't take long to wear out. Many who buy sperical type end up having to buy this one anyway.
JBG March 9, 2012
Almost Flawless
Definitely well built...no question about that! And once installed I was able to very easily center the rear of my 2012 GT after dropping it with lowering springs. The adjustment is easy to reach vs. others I looked at. My only issue was that the driver side bushing was slightly too thick (about 1/16 inch)and needed to be carefully 'shaved'. That end was simply 'not' going to fit (even with some help from a mallet) without reducing its width slightly. This added some installation time (around 2 hours extra on a hot Texas afternoon) while I determined how to best to fix it & secured a sander, etc. Otherwise it would have gone flawlessly.
dan h July 4, 2011
BEEFY!
Havent put it on yet. But, quality looks top notch. Very beefy compared to the stock one. Good detailed instructions come from BMR as well. And quick shipping from CJ !
T.J. April 27, 2011
4 Results

Product Video

By Bill Tumas: We're here with an Adjustable Panhard Bar from BMR. All 2005 through 2014 Mustang use a panhard bar from the factory. When lowering your Mustang, because the panhard bar mount side to side, it's going to offset your rear suspension. Adjustable bars just one from BMR will line up your track properly. It features a black hammer-tone finish. It's also available in red. It comes with polyurethane greasable bushings and CNC-adjusters for on-car adjustment.

All BMR Panhard Bar use 1.25", heavy weld DOM tubing. This particular model with the polyurethane bushings is designed more for street use. Looking for a competition use? We offer a rod end version as well. Anytime you're lowering mustang, you want to go with the panhard bar that's adjustable to make sure you're track is set properly.