PA Performance High Torque Mini Starter for 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972 and 1973 Mustangs with a 289, 302 or 351 Engine and an Automatic Transmission and 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994 and 1995 Mustangs with a 302 or 351W Engine.
If you've increased the compression of your engine or need a replacement alternator, PA Performance's High Torque Mini Starter for 1965-1973 Mustangs with an automatic transmission and 1982-1995 Mustangs is the perfect choice. The High Torque Mini Starter offers better torque, requires less cranking amps and weighs much less than the factory starter. Never worry about being stranded in a parking lot unable to start your engine.
This Ford Style Mini Starter is an upgrade for most applications prior to or near 1993. The PA Performance High Torque Mini Starter works well on higher compression engines up to 12.0:1 compression. Features 1.4kw of cranking power and weighs pounds less than the bulky factory unit. Also provides additional clearance for long tube headers. The starter's very small size increases header clearance and reduces the effects of "hot start". Early factory field wound starters weigh around 18 lbs. The mini starters weigh in at 8-1/2 lbs. which is over 50% less than the factory starter! Even with the small package, the starter packs a bigger punch and requires less cranking amps.
Includes the conversion wire kit for “Upgrade Applications” but it is not used with “Direct Replacement” applications. This unit is smaller than the early starters and the same size but with a stronger output compared to the newer (early 1990s') starters.
All starters are 100% new, tested prior to shipping.
*Also fits 1965-1973 Mustangs that have converted to a T-5 transmission and are using the 1979-1993 late model bell housing.
Purchase a PA Performance High Torque Mini Starter for 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972 and 1973 Mustangs with a 289, 302 or 351 Engine and an Automatic Transmission and 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994 and 1995 Mustangs with a 302 or 351W Engine from CJ Pony Parts today!
Product ReviewsWrite a review
Will this fit a 66 mustang with a 351w ('93 block) swap with t5?
Waiting to get my Unisteer rack and pinion installed but just want to make sure this starter works with a 1969 Mustang with a 351W, FMX trans? Thanks
I am rewiring my motor and using this starter, can I eliminate the starter solenoid all together and run the ignition start wire directly to the starter?
I have a 66 Mustang 289 with t5 conversion using 157 tooth flywheel, and 1987 5.0 aluminum bell housing. The space from engine side of flywheel to starter mounting surface is 3/4". Will this starter work
Just to be sure, will this fit a 1965 289 stock auto?
HOW MANY BOLTS TO HOLD IT ON THE BELL HOUSING?
Does this starter fit a 164 tooth fly wheel on a 66 289 engine
Hello, will this starter work on a 351c with an automatic transmission?
You Might Also Like
CJ's Low Price:$149.99
Regular Price: $36.99
Special Price: $29.59
Regular Price: $156.99
Special Price: $141.29