It
has been discovered that the left hand inserts for all sequential
light systems have been wired incorrectly. The result is that the lights
sequence backwards or from the outside to the inside.
The
correction can be made simply by one of two ways. The green and gray
wires in the insert sockets can be switched simply by pulling them out
and replacing them in the opposite sockets prior to installation. In
the case of the C5ZZ-STL-DLX left hand lamp assembly, or with inserts
that have already been installed, these wires must be connected to the
opposite color wires from the control module harness. Green to gray
and gray to green. |
