ACC Carpet Original Style Molded Red Coupe 1964-1/2

ACC Carpets: 3528 02
MSRP: $252.08
CJ's Low Price:
1480896000 24526
Earn 161 RPM Points What's this?
ACC Carpet Original Style Molded Red Coupe 1964-1/2
ACC Carpet Original Style Molded Red Coupe 1964-1/2 Play ACC Carpet Original Style Molded Red Coupe 1964-1/2 Video 1
ACC Carpets

Product Description

ACC Red Molded Original Style Carpet for all 1964-1/2 Coupe Mustangs.

If the time has come to replace that worn, dirty or torn floor carpet in your 1964-1/2 coupe, this Molded Original Style Carpet manufactured by ACC is the perfect choice. Almost nothing can freshen up the interior of your Mustang more than by installing new floor carpet!

This Original Style Carpet for all 1964-1/2 coupe Mustangs is heat molded in two separate pieces for an easy installation. It is made using the same 80/20 loop material mix as the original carpet (80% rayon/20% nylon). The original loop material is tufted to a 5/32 gauge loop and contains 24 ounces of yarn per square yard. It is then dyed using the finest dyes available and tested for ozone humidity fading & light fastness. The underside of the carpet features heavy 36 ounce jute padding for insulation.

The carpet is available in factory correct colors and features an original style, color matching front heel pad that is located on the driver side.

ACC manufactures all of their carpets to meet or exceed OEM specifications. If you are looking for the finest reproduction floor carpet available for your Mustang, this is it. No interior restoration project is complete without an ACC carpet.

*What makes this carpet different from 1965 Mustang carpet is where the carpet meets the door sill plates. On 1965 Mustangs the carpet runs all the way up on the rockers and on 1964-1/2 Mustangs it does not. 1965 Mustangs also had an additional toe pad extending off of the heel pad, 1964-1/2 carpet does not have this.

Please Note: ACC's carpets do not come with pre-cut holes, allowing you to make the necessary cuts only where needed for various interior components.

Tech Tip: When you first take your new carpet out of the box, you may notice quite a few wrinkles. This is normal. We recommend laying the carpet out in the sun for a few hours to help soften the jute backing and to help reduce the amount of wrinkles that are visible prior to installation.

CJ Pony Parts offers a wide selection of Mustang carpet options for the main interior, the floor, kick panels, trunk and for fold down seats. Most Mustang carpet is available in original style, cut pile, mass back, cut pile mass back, essex, or essex mass back styles. An extensive selection of underlayment, insulation and Dynamat is also available to put underneath your Mustang carpet, if necessary.

Installation Instructions

Mustang Installation

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a review
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 91.2ms
  • bvseo-msg: HTTP status code of 404 was returned;

Product Questions

  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 194.9ms
  • bvseo-msg: HTTP status code of 403 was returned;

You Might Also Like