ACCEL Fuel Injector EV1 Style Jetronic/Minitimer Connector Set 1986-2004

CJ's Part Number: INJ19-V
MSRP: $311.95
CJ's Low Price:
1480636800 42220
Earn 299 RPM Points What's this?
ACCEL Fuel Injector EV1 Style Jetronic/Minitimer Connector Set 1986-2004

Product Description

ACCEL Set-of-Eight EV1-Style Jetronic/Minitimer Connector Fuel Injectors for 1986-2004 Mustangs.

These ACCEL fuel injector sets feature high-impedance injectors that are specifically designed for race applications. Features Jetronic/Minitimer electrical connector with an EV1 style body. Provides precise control of fuel delivery and atomization for increased power, improved throttle response and better fuel economy. Featuring all-new construction, these are not modified stock units or re-manufactured from used cores.

These injectors utilize a precision-ground, Bosch-style pintle design to produce a wide-angle conical spray pattern for the ultra-fine fuel atomization and improved burn efficiency. New low-mass disc design ensures accurate metering control even at ultra-low and high duty cycles. ACCEL fuel injectors come complete and ready for installation with precision-molded O-rings and fine-mesh fuel strainers. Not recommended for stock applications. Use with re-calibrated high-flow mass air sensors only.

ACCEL's EV1-Style Jetronic Connector Available Flow Rates:
19 lbs./hour
24 lbs./hour
30 lbs./hour
32 lbs./hour
36 lbs./hour
44 lbs./hour
48 lbs./hour

These injectors operate at 14.4 ohms impedance.

*Not legal for sale or use on pollution-controlled motor vehicles.
*Does not fit 1999-2004 Cobra or 2003-2004 Mach 1 Mustangs.

Similar Mustang Parts

similar Mustang parts More Fuel Injectors & Mass Air Meters  

Installation Instructions

Mustang Installation

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a review
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 126.55ms
  • bvseo-msg: HTTP status code of 404 was returned;

Product Questions

swaped to a eddelbrock 3821 efi intake and need a part # for injector, thanks and would you know what was the original 19 lb or 13 lb part #s thanks ken basicly what goes in the hole.

Asked by: kegger
Without knowing the year/engine on your Mustang, it's hard to say what injectors you'd want. Visit our category to find the ones that suit:
Answered by: CJ Pony Parts
Date published: 2015-08-25

can I buy one injector

Asked by: louie ashfield
No, we only sell them in kits, since it's highly recommended that you replace all at once.
Answered by: CJ Pony Parts
Date published: 2015-03-04

1989 Mustang 5.0 LX All original stock. Why are the Accel 19 lb injectors not considered stock OEM replacements? These should not require retuning MAP.

Asked by: mrobins26
  • 2016-12-01T08:17CST
  • bvseo_cps, prod_bvqa, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_3
  • loc_en_US, sid_INJ19-V, PRD, sort_recentAnswersFirst
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 725.09ms

You Might Also Like