Adjustable Accelerator Pedal Mount 1-1/2" Spacer for all 2013, 2014, 2015, 2016 and 2017 Focus STs and 2016-2017 Focus RSs.
If you have ever taken your 2013-2017 Focus ST Auto-Crossing or your brand new 2016-2017 Focus RS to a Track Day or on the occasional spirited drive, you may have noticed how difficult it is to make the quick transition from the accelerator pedal to brake pedal, perform proper left foot braking or even precisely execute a heel toe maneuver.
One of the biggest complaints amongst Focus enthusiasts that continue to push their cars to the limit is the excessively low accelerator pedal position. Until now, this could cause a number of serious issues. But not anymore! Not only will this Billet Aluminum Accelerator Pedal Mount bring your gas pedal 1-1/2” closer to you, the built in adjustability will allow you to shift the left-to-right position of the pedal approximately 3/4”. Adjustments can easily be made in seconds by loosening the included hardware and simply sliding the pedal into your ideal position.
Features and Benefits:
- Billet Aluminum Construction
- Includes ALL Necessary Hardware
- 1-1/2” Thick with 3/4” Lateral Adjustability
- Easily Installs and Adjusts in Minutes
- Provides Ideal Positioning for Spirited Driving
- Will fit on 2013-2016 ST models and all new 2016 RS models
- Made in the USA
*For full lateral adjustability, the underside of your factory pedal assembly has two small plastic locating tabs that will need to be removed. These tabs can easily be removed with wire cutters or a small blade, removal of these tabs in no way effects the performance of the pedal assembly.
Even though you will notice the biggest benefits of this pedal mount when you are trying to get the most out of your Focus ST or RS, the effects will still be noticeable during normal driving as well. The accelerator pedal ends up in the perfect position of your choosing for professional drivers to the casual novices. Most people will even notice a major difference in the relaxed sitting position while you are driving on a day to day basis, offering you a much better overall driving experience and newly discovered level of comfort.
Order the Adjustable Accelerator Pedal Mount 1-1/2" Spacer for your 2013, 2014, 2015, 2016 or 2017 Focus ST or your 2016-2017 Focus RS from CJ Pony Parts today!
Product ReviewsWrite a review
Nice tool. Is it also fits on a Volvo V40 2017? Kind regards, Kees Jan Blaauboer
Will this fit the fiesta st as well?
Has the bolts being not long enough been sorted out? Really wanna get this one.
Will your accelerator spacer for the Focus ST fit a right hand drive 2016 Focus RS and will you ship to Australia?
will this fit the 2016 RS?
Does this spacer fit Australian focus st without modification?
what kind of material of bolts and nuts, is it aluminum too or others?
You Might Also Like
From: /** Note: This is used for related configurable parts to properly display price w/o regular price */?>CJ's Low Price:$222.99
Turbosmart Blow Off Valve Kompact Shortie Dual Port Focus ST 2013-2017/EcoBoost 3.5L F-150 2011-2012/** * Cases for simple product that is not on sale */ ?>CJ's Low Price:$170.99
/** * Cases for simple product that is not on sale */ ?>CJ's Low Price:$159.00
/** Note: This is used for related configurable parts to properly display price w/o regular price */?>CJ's Low Price:$148.99
If you've ever driven one of these cars the gas pedal is actually very, very low to the floor, much lower than the plane where the clutch and the brake are. This creates an issue with some drivers where they catch the brake when they're going for the gas pedal. If you're not a performance heel and toe driving it's almost impossible to do on the Focus. If either of these is an issue for you and your Focus ST, I think we have a solution. This billet aluminum gas pedal spacer. We're going to show you how to install it using our 2015 Focus ST.
Thanks to this electronic throttle moving the gas pedal on the Focus is no big deal, because there's no cable attached to it, it's simply a plug and play. All you're going to do is unbolt yours from the floor. This is actually going to bolt in place right in here and here using the factory hardware. Then you're going to bolt the gas pedal to the billet spacer using this hardware here. That's going to get it much on closer to the plane where the clutch and brake are. In addition to spacing the pedal out from the floor making it easy with the clutch and brake, once you bolt it to this it's actually adjustable side-to-side as well. You can really dial on location on where you want your gas pedal.
For this installation you need a 1/4" ratchet, 10mm Socket, and a couple extensions.
The spacer is relatively easy to install, but it's going to be kind of hard to see since it's under the dashboard. What you're going to do, they'll be two bolts that will mimic these that are on the factory gas pedal. Once you remove the gas pedal this is going to bolt down in the factory location. The factory hardware will go in these two locations here. Then what you're going to do is remove these two nuts, and the gas pedal will bolt to these, and then you tighten them down, and adjust it side-to-side. Obviously, don't forget once you've done the whole installation make sure you plug the gas pedal back in.
We'll start by taking off the lower bolt on the gas pedal. Then we'll remove the upper. Pull the pedal down and unplug it. We'll show you again outside the car, so you can really see what this is going to do once it's matted. Again, these two holes for your factory location, and then this will now bolt to the two studs, it's all supplied nuts. All you've got to do is actually slide this side-to-side, and get it exactly where you want it in the car before you tighten it down. We're going to hang it on the studs, and then reinstall the factory hardware.
Get them both installed in place and tighten them up. Now I'll remove the retaining nuts from the studs, so we can install the original pedal. Now I'll mount the pedal on those studs, it's not a bad idea to plug it in first if you're there. These studs you just want to get hand tight, and then we can adjust the pedal. Here you can see the amount of adjustment you have, it's all the way over, put it all the way over there as well. We kind of set it up right over here. Once you get it where you want it tighten it down, and you're installation's finished.
At first it appears sort of low, when you look at it the gas pedal is in the perfect spot right now. It's right in an even plane with the brake. It's great for normal driving, or those track days you want to be able to use both at the same time.
It's a very simple installation, and it should make a noticeable difference if you drive your car a lot. The gas pedal spacer is one of the small parts that you probably wonder why you need it.
Once you get it you're going to wonder how you ever lived without it. It really makes the gas pedal that much nicer, and really puts it in a much better location, making it a fun car to drive that much more enjoyable. The installation's pretty straight forward. It'll take you around a half an hour, and you'll be back on the road in no time.