Airaid Modular Intake Tube GT 2015-2017

Airaid: 450-932
MSRP: $199.39
CJ's Low Price:
1490572800 59577
Here is a great part that would perfectly compliment your new Modular Intake Tube.
CJ's Low Price:
Earn 159 RPM Points What's this?
Airaid Modular Intake Tube GT 2015-2017
Airaid Modular Intake Tube GT 2015-2017 Airaid Modular Intake Tube GT 2015-2017 Play Airaid Modular Intake Tube GT 2015-2017 Video 1

Product Description

Airaid Modular Intake Tube for all 2015, 2016 and 2017 GT Mustangs.

Are you looking for a cost-effective performance upgrade on your GT? How about a mod that will give you better power, fuel economy and looks under the hood while not requiring a tune? Airaid has your solution with their new Modular Intake Tube for all 2015-2017 GT Mustangs.

Tech Tip: For 2017 GT Mustangs manufactured after 9/16, vacuum for the CMCV’s (Charge Motion Control Valves) is no longer picked up from the intake tube. This will require a plug to be used with the unused port/fitting on your new cold air intake tube when installing on all 2017 GT Mustangs built after 9/16 only. The production date on the vehicle (month/year) is located on decal in driver side door jamb.

Features and Benefits:
- Replaces Factory Intake Tube
- Constructed of Cross-Linked High-Density Polyethylene
- Resistant to Heat Transfer
- Optimizes Airflow to the Engine
- Straightens and Improves Airflow
- Retains Factory Airbox
- Improves location of the Mass Air Flow Sensor
- Provides Better Throttle Response, Horsepower and Fuel Economy
- All Necessary Mounting Hardware Included for Hassle-Free Installation
- Made in the USA

This Airaid Modular Intake Tube replaces your restrictive stock intake tube, and is constructed of cross-linked high-density polyethylene for minimum heat transfer. Because of the straight-through design, this intake tube optimizes airflow to the engine and provides better throttle response, more horsepower and improved fuel economy. It’s a smart idea to pick up this intake tube because it will give you a couple extra horses under the hood while providing you better gas mileage, all without breaking the bank.

You’ll be able to retain your factory airbox, for the stock, sleeper-like look that all Mustang enthusiasts are after. These intake tubes accommodate all factory sensors and fittings that attach to the factory tube. Also, all necessary mounting hardware is included for an easy and hassle-free installation on your 2015-2017 GT Mustang.

CJ Pony Parts has dozens of new Airaid products that will be perfect for your Mustang of any model year, and each include a lifetime warranty and free same day shipping!

Order an Airaid Modular Intake Tube for your 2015, 2016 or 2017 GT Mustang from CJ Pony Parts today!

Similar Mustang Parts

similar Mustang parts More GT Cold Air Kits  

Installation Instructions

Mustang Installation

Mustang Applications

This product will fit the following Mustang years:

Product Reviews

Write a review
Airaid Modular Intake Tube GT 2015-2017 is rated 4.9 out of 5 by 8.
Rated 5 out of 5 by from easy install, great fit Installed the modular intake along with k&n filter haven't dyno'ed but the fitment is spot on, took about 30min to install, throttle response is better, higher rpm seems to pull harder
Date published: 2015-09-22
Rated 4 out of 5 by from Great Product- 2016 GT Nice looks over stock. Install took a little longer than expected because of the clamp on the sound tube. Get some long pliers for this. I replaced it with the kit that comes in the kit. Only complaint is that fittings seem loser than the OEM ones especially the larger one that feeds back into the valve cover area. Hopefully it holds up. Turned car on and received no errors or lights. Overall nice looking product, hoping for a few performance gains with my installed K&N filter as well.
Date published: 2016-03-10
Rated 5 out of 5 by from Simple Upgrade Great upgrade for the price. Removes the restrictive tube, and looks awesome. I went the extra step and removed the ugly sound tube since the kit includes the caps. Getting that 10mm nut off the fire wall is a pain in the butt to remove the sound tube. But rest of the installation was straight forward. The cap that goes on the Airaid tube for the sound tube removal felt loose, but a simple zip tie secured it nicely.
Date published: 2016-07-21
Rated 5 out of 5 by from Easy to Install I installed this with a K&N Air Filter and it was relatively easy to install. the only snag was the clamp on the rump barly fit and was too easy to loosen all the way. I noticed a throttle response improvement right away. Plus it just looks awesome!
Date published: 2016-06-10
Rated 5 out of 5 by from Significant difference And easy 15 minute install for great value in performance and better gas mileage Best bang for the buck one of the more reasonably priced air intakes that gives you a great difference in performance
Date published: 2016-02-07
Rated 5 out of 5 by from Better looking than oem. Improvement overall with a drop in K&N filter and attractive under the hood.
Date published: 2015-12-29
Rated 5 out of 5 by from Nice,alot better than the stockpiece it replaced. Have not put it on yet,hopefully this weekend.Its looks less restrictive.
Date published: 2015-03-12
Rated 5 out of 5 by from great looking,easy fitting airaid modular intake tube 2016 mustang gt fastback
Date published: 2016-05-17
  • y_2017, m_3, d_24, h_23
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_8
  • loc_en_US, sid_CAK164, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 6.15ms

Product Questions

does this work for the 2.3 l eco boost

Asked by: Mike A
No it will not work.
Answered by: rk cjpp
Date published: 2016-03-16

can it be used with Roush supercharger? 

Asked by: nhyder
No it is for n/a only.
Answered by: rk cjpp
Date published: 2016-01-07

Has there been any hp/tq gains from just replacing this part. 

Asked by: Kilo1
It offers modest gains.
Answered by: CJ Pony Parts
Date published: 2015-06-15

How does this compare to Airraid CAI? Would you still be able to tune this or would it be better to just buy the CAI kit instead? Attempting to stay as stock as possible before adding boost and would hate to buy the same thing twice.

Asked by: Joshual07
  • y_2017, m_3, d_25, h_6CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_4
  • loc_en_US, sid_CAK164, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 6.82ms

You Might Also Like

Product Video

Airaid Modular Intake Tube GT 2015-2017 Video Transcript
By Bill Tumas: We’re here with the Airaid's modular intake tube, fitting your 2014 Mustang GT.

The Airaid modular intake tube is a great low cost upgrade for the factory restrictive air intake found on your 2015 Mustang GT. By keeping the factory air box, and removing the air tube, it allows you to save money while still getting the performance upgrades. This tube is a direct replacement for the factory tube. It includes all your fittings for all your factory equipment. AIRAID includes all hardware necessary for installation, including silicone cuplers, hose clamps, and all necessary fittings.

The Airaid module intake tube is made of high density plastic. It will not require a tune when installing.