Airaid PowerAid Throttle Body Spacer for all 2011, 2012, 2013, 2014, 2015, 2016 and 2017 V6 Mustangs.
The Airaid PowerAid throttle body spacers are available for V6 powered Mustang models from 2011 to 2017. The PowerAid throttle body spacer was developed primarily for V6 Mustang engines, and it’s helped countless Mustang owners improve the engines of their favorite pony cars over the past several years. Basically, spacers are small pieces of aluminum that are fabricated to fit the inlet of your Mustang’s throttle body, and they’re especially great in V6s.
PowerAid Throttle Body Spacers Provide Improved Mid-Range Performance
The PowerAid throttle body spacer was developed to enhance your vehicle's off idle to mid range performance and efficiency. The unique "Helix Bore" design of the PowerAid creates a spinning action of the incoming air. As air passes through your throttle body, this helical effect causes the air molecules to organize and maintain high velocity. The organization and high velocity of the air is extremely beneficial because it helps to provide a superior atomized mixture of fuel and air all the way into the combustion chamber. The benefits you will see are tremendous torque gains between 800 to 2500 RPM, and potential increases in your fuel economy, depending on driving conditions.
In general, this throttle body spacer can help your Mustang in a number of ways.
Benefits of Airaid Throttle Body Spacers:
- Optimum air/fuel mixture to the engine. It also ensures the right amount of fuel feeds to the cylinders as needed.
- Mid-range torque gains from idling to 2500 RPM.
- Increased fuel economy.
- Overall performance gains and improved driving.
Airaid's PowerAid Throttle Body Spacers are manufactured from the highest quality Aircraft Grade Billet 6061-T6 Aluminum. Each PowerAid is specifically designed for your application and includes the necessary gaskets, hardware and precision brackets to maintain proper geometry with the factory components. The PowerAid Spacer can be installed in less than an hour using common hand tools with no drilling or cutting required.
Features of Airaid PowerAid Throttle Body Spacers:
- Manufactured using highest-quality aluminum.
- Precision design and built to perform.
- Easy to install without the need for any modifications.
- Manufactured in the USA.
While providing you with unbelievable performance, you can feel assured that you have purchased the highest quality performance product. Airaid is proud to have all their products made in the USA, with genuine American parts. Airaid stands behind their products 110%!
If you are looking for one of the best throttle body spacers on the market, you’ve found it right here at CJ Pony Parts! Airaid is the one of the best-known manufacturers for throttle body spacers, and they’re built specifically for Mustang V6 engines.
We are proud to offer throttle body spacers by Airaid since they’re manufactured right here in the United States, ensuring you get a quality product from an all-American vendor. If you have any questions about our products, vendors, or purchasing process, you can contact one of our Mustang experts for a prompt answer. And if you order before 5 PM EST, we can ship most orders today for no extra charge! It’s just another way CJ Pony Parts helps you get the parts that you need.
Order the Airaid PowerAid Throttle Body Spacer for your 2011, 2012, 2013, 2014, 2015, 2016 or 2017 V6 Mustang from CJ Pony Parts today!
Product ReviewsWrite a review
Can I use this AIRAID body spacer with the BBK Throttle body and a AIRAID cold intake on my 2014 mustang v6 3.7L
Will this fit with my 73 mm Bbk throttle body and K&N 69 typhoon cai on my 2015 v6? And what type of gains or difference would I see
I have put TBS in all of my Mustangs........It really does work. But with higher technology and touchy engines, I have a small concern this might throw a code.
Do you have to buy a new CAI when buying this? Or will it fit with a stock one?
I have a 85mm bbk throttle body and was wondering if there is any point in putting this spacer in. Will it make a difference or improve something?
Hey guys, will this fit with the 2015 Mustang v6 Roush Cold Air Intake? Thanks!
Does this part fit with an air raid cold air intake setup? I have a 2015 Mustang V6 with the dry filter cold air intake set-up.
Is there any additional advantage to installing this with the Airaid Cold Air Intake kit? Even though not recommended by Airaid (because of space?) individuals on blog sites seem to have done it. Does this enhance CAI's gains in HP & fuel economy or no?
You Might Also Like
/** * Cases for simple product that is not on sale */ ?>CJ's Low Price:$314.06
/** * Cases for simple product that is not on sale */ ?>CJ's Low Price:$305.90
This Throttle Body Spacer is made of high quality billet aluminum mounts between the throttle body and the intake manifold on your 2011 through 2016 V6 Mustang. The pad and the Helix Bore design creates a funnel of air going to the intake, which Airaid claims is going to increase your fuel economy and low end torque.
All necessary hardware, hoses and clamps for installation are included.