AJE Suspension Front Lower Control Arm Tubular With Spring Cups Pair 1979-1993

AJE Suspension: MU-6001
CJ's Low Price:
$429.99
1480636800 50797
Earn 429 RPM Points What's this?
AJE Suspension Front Lower Control Arm Tubular With Spring Cups Pair 1979-1993
AJE Suspension

Product Description

AJE Suspension Pair of Front Lower Tubular Control Arms with Spring Cups for all 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, and 1993 Mustangs.

Are you disappointed with the factory front lower control arms on your 1979-1993 Fox Body Mustang? If so, then you need to purchase AJE Suspension's tubular front lower control arms for your Mustang. With the tubular design, strength and fitment are guaranteed. Don't wait to begin enjoying a firmer and more defined suspension!

Product Features:
- Comes with ball joints, and can be replaced with factory style ball joints (BJL7)
- Polyurethane bushings
- Can be used with AJE K-members
- Spring cups are included

Please Note: If using SN-95 spindles a 3/8" spacer is included. Without this spacer, the nut will bottom out on the ball joint's threads before it properly tightens the tapered stud to the spindle.

For the street, drag, or road racing, AJE Suspension A-arms keep you in control. Providing reduced weight plus additional caster/camber to improve your suspension geometry. These tubular steel A-arms are powdercoated for lasting good looks and corrosion resistance. AJE control arms come with polyurethane bushings to provide increased responsiveness with minimum noise. These control arms can be used with AJE K-members (KM21). AJE control arms come with ball joints, and can be replaced with factory style ball joints (BJL7).

Tubular control arms are a great upgrade due to their added strength over stock and additional clearance. With premium quality materials and a company such as AJE Suspension, there are no concerns about quality or fitment. No matter what you have done to your Mustang, these front lower control arms will suit your vehicle well. Due to the included spring cups, coilovers are not necessary to install these control arms.

Order a Pair of AJE Suspension Tubular Front Lower Control Arms with Spring Cups for your 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, or 1993 Mustang from CJ Pony Parts today!

Similar Mustang Parts

similar Mustang parts More Front Lower Control Arms  

Installation Instructions

Mustang Installation

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a review
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 28.35ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

Product Questions

The part specifies up to a 93 Mustang--would they also fit a 95 GT? I've been looking for set of tubular control arms for my 95 but they seem to be a rare part if not going with coil overs?

Asked by: 95SinnerGT
These will not work on a 95 gt.
Answered by: rk cjpp
Date published: 2016-08-08

Will these work on other k members. Like upr

Asked by: Dhawk
The manufacturer has not listed them as fitting any other k members but their own.
Answered by: rk cjpp
Date published: 2016-01-12

AJE Suspension Front Lower Control Arm Tubular With Spring Cups Pair 1979-1993, how well would this handle road racing or would you recommend another set of control arms?

Asked by: lulu122436
They would work great for road racing.
Answered by: rk cjpp
Date published: 2016-01-04

will these control arms work with any tubular k-member and what does it do to them angles of the front end, I have 92 lx with maximum motorsport caster/camber plates, upr mild steel k-member, eibach springs kyb struts, factory spindals.

Asked by: lulu122436
They should work fine with your k member, it will change the caster and camber a little so an alignment will be needed.
Answered by: rk cjpp
Date published: 2015-12-24

If i buy these with the k member does it affect the geometry of my vehicle? Do i need to modify my fender well?

Asked by: Coconut
It will change the caster and camber but depending on the wheels and spindles you use it may require the fender lips to be rolled.
Answered by: rk cjpp
Date published: 2015-12-02

Will this work with UPR mild steel tubular k-member

Asked by: mjw2993
Yes.
Answered by: CJPP Dave
Date published: 2015-12-01

well these fit a 1988 stock k member and spindles?

Asked by: superstiles
Yes they will.
Answered by: CJPP Dave
Date published: 2015-11-10

Do your MU-6001 control arms come complete with ball joints AND bushings?

Asked by: sxl010
Yes, both are included.
Answered by: CJ Pony Parts
Date published: 2015-08-25
  • 2016-12-02T08:15CST
  • bvseo_cps, prod_bvqa, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_9
  • loc_en_US, sid_LCA99, PRD, sort_recentAnswersFirst
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 31.44ms
  • QUESTIONS, PRODUCT

You Might Also Like