Pair of AJE Suspension Tubular Lower Control Arms for all 1965, 1966, 1967, 1968, 1969 and 1970 Mustangs with an AJE K-Member, Coilovers and Late Model Mustang Spindles.
Modernize the front suspension on your classic 1965-1970 Mustang with a pair of AJE Suspension's tubular lower control arms! These heavy-duty, tubular front lower control arms from AJE Suspension keep you in constant control. The control arms are the perfect choice for street, drag or road racing.
The AJE control arms provide a reduction in overall weight plus improved suspension geometry. Each control arm is made from premium quality tubular steel for strength and powder coated black for lasting good looks and corrosion resistance. AJE includes polyurethane bushings with every control arm to provide increased responsiveness with minimum noise.
AJE Tubular Lower Control Arm Features:
- Heavy-Duty Tubular Steel Construction
- Lightweight Design
- Polyurethane Bushings
- Black Powder Coated Finish
The tubular lower control arms are only for use with the AJE Suspension tubular k-member and AJE coilovers as well as 1987-2004 Mustang front spindles and brakes. AJE Suspension uses 1979-1993 lower ball joints and can be replaced with factory or upgraded 1979-1993 Mustang ball joints. The caster camber plates from AJE must be used with the coilover kit. Your factory 1965-1970 sway bar may be used with AJE's control arms.
Please Note: If using SN-95 spindles a 3/8" spacer is included. Without this spacer, the nut will bottom out on the ball joint's threads before it properly tightens the tapered stud to the spindle.
AJE Suspension is well known for its late-model Mustang tubular-replacement engine cradles or k-members and other suspension upgrades. For years, AJE's products have been used successfully in drag racing and other street performance scenarios. Now you can have the same premium quality hardware as your late-model Mustang friends with AJE's new tubular front lower control arms.
Order a pair of AJE Suspension's Tubular Lower Control Arms for your 1965, 1966, 1967, 1968, 1969 or 1970 Mustang from CJ Pony Parts today!
Product ReviewsWrite a review
You Might Also Like
CJ's Low Price:$239.99
CJ's Low Price:$599.99
Regular Price: $74.99
Special Price: $67.49
These tubular a-arms are much stronger and lighter than your factory control arms and must be used with Anthony Jones' k-member in your '64 through '73 Mustang. They use a '79 through '93 fox body-style ball joint allowing you to use the spindles from either a '79 through '93 or a '94 through '04 car.
These AJE control arms must be used with their matching coilover conversion, and again, they also must be used with their k-member kit.