Alloy Metal Products Engine Gauge Feed Wiring Harness Without Tachometer 289/302/351W 1967-1968

Alloy Metal Products: 67-GF-SB-W/O-T
CJ's Low Price:
$26.99
1481328000 39925
Don't forget to add the hardware that you'll need for a proper install!
CJ's Low Price:
$6.99
Qty
Earn 26 RPM Points What's this?
Alloy Metal Products Engine Gauge Feed Wiring Harness Without Tachometer 289/302/351W 1967-1968
Alloy Metal Products

Product Description

Alloy Metal Products Engine Gauge Feed Wiring Harness for all 1967-1968 Mustangs with a 289, 302 or 351W Small Block Engine and without a Tachometer.

Faulty wiring can be difficult to trace and very frustrating to deal with. If you have noticed some issues with your 1967-1968 Mustang's engine gauges, it may be time to replace your engine gauge feed. Make sure to do it with quality by purchasing this Engine Gauge Feed Wiring Harness from Alloy Metal Products. Designed specifically for your Mustang that came without a tachometer and has a 289, 302 or 351W engine, this wiring will easily install into you classic Mustang's gauge wiring assembly.

Features & Benefits:<
- Direct Replacement
- Connects Firewall to Engine Gauge Sending Units
- Units Include: Oil Pressure, Water Temperature & Coil
- Includes Color Colored Wires & Connectors

This engine gauge feed wiring harness is a direct replacement for your classic Mustang and has been designed to the original Ford specifications. This wiring will plug into your firewall and then connect to your engine gauge sending units, including your oil pressure, water temperature and coil units. Upholding the reputation that they have earned, Alloy Metal Products manufactures their 67-GF-SB-W/O-T wiring harness to concours quality standards. This harness comes with the correct color wires and the proper connectors for an easy install.

Please Note:This wiring harness will not fit with Mustangs that originally came with a Tachometer.

*This is for Mustangs with a Small Block Ford engine ONLY.

The wiring in your classic Mustang is probably very worn out and brittle, if it even still works at all! There are lots of options to replace it, and whether you're going for a concours restoration, or just want quality OEM products, check out the inventory from Alloy Metal Products.

So hurry up and purchasing this Alloy Metal Products 67-GF-SB-W/O-T Engine Gauge Feed Wiring Harness for your 1967-1968 Mustang with a 289, 302, or 351W Small Block Engine and without a Tachometer from CJ Pony Parts today!

Similar Mustang Parts

similar Mustang parts More Gauge Feed Wiring  

Installation Instructions

Difficulty

Difficulty: Easy

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a review
Alloy Metal Products Engine Gauge Feed Wiring Harness Without Tachometer 289/302/351W 1967-1968 is rated 1.0 out of 5 by 2.
Rated 1 out of 5 by from Disappointed... I bought this to have an exact match for my 289 w/o Tach. 3 of the three wires were much shorter than the original meaning I had to splice wires in to make them reach the oil and temp senders. I if I wanted a mess of slices wires, I would have made my own out of my old one!
Date published: 2015-08-14
Rated 1 out of 5 by from not worth it. I bought this with expectations but the wire are to short to reach were they should go and the oil sender wire had the wrong connector.
Date published: 2015-05-18
  • y_2016, m_12, d_9, h_17
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_US, sid_WGF4C, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 99.75ms
  • REVIEWS, PRODUCT

Product Questions

  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 183.41ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: HTTP status code of 403 was returned;

You Might Also Like