American Car Craft Air Conditioning Vent Trim 9-Piece Kit With Etched Pony Logo Brushed Stainless Steel Non-Performance Package 2015-2017

American Car Craft: 271052
MSRP: $95.95
CJ's Low Price:
$86.36
1490227200 68555
Earn 86 RPM Points What's this?
American Car Craft Air Conditioning Vent Trim 9-Piece Kit With Etched Pony Logo Brushed Stainless Steel Non-Performance Package 2015-2017
American Car Craft Air Conditioning Vent Trim 9-Piece Kit With Etched Pony Logo Brushed Stainless Steel Non-Performance Package 2015-2017 American Car Craft Air Conditioning Vent Trim 9-Piece Kit With Etched Pony Logo Brushed Stainless Steel Non-Performance Package 2015-2017 American Car Craft Air Conditioning Vent Trim 9-Piece Kit With Etched Pony Logo Brushed Stainless Steel Non-Performance Package 2015-2017 American Car Craft Air Conditioning Vent Trim 9-Piece Kit With Etched Pony Logo Brushed Stainless Steel Non-Performance Package 2015-2017 American Car Craft Air Conditioning Vent Trim 9-Piece Kit With Etched Pony Logo Brushed Stainless Steel Non-Performance Package 2015-2017
American Car Craft

Product Description

American Car Craft Brushed Stainless Steel 9-Piece Air Conditioning Vent Trim Kit with Etched Pony Logo for 2015, 2016 and 2017 Mustangs without the Performance Package.

Customize the interior of your 2015-2017 Mustang with this 271052 Brushed Stainless Steel 9-Piece Air Conditioning Vent Trim Kit with Etched Pony Logo from American Car Craft! With a unique etched pony logo, these vent trim pieces will add a great custom look to the interior of your S550.

Air Conditioning Vent Trim Kit Features:
- Official Ford Licensed Product
- Stainless Steel Construction
- Covers 3 A/C Vents
- Etched Running Pony Logo
- Brushed Satin Finish
- Will Not Tarnish, Fade or Rust
- Peel and Stick Installation
- Made in the USA

Officially licensed by Ford, these air conditioning vent trim pieces are constructed from high-quality stainless steel with a brushed satin finish that will not tarnish, fade or rust. Adding a bit of a custom touch to the trim pieces is a running pony logo that has been etched into three of the trim pieces for each air vent. Manufactured in the USA, these trim pieces will cover the 3 A/C vents on the center console and take only minutes to install with their simple peel and stick application.

Please Note: This 9-piece vent trim kit 271052 from American Car Craft is designed specifically for Mustangs NOT equipped with the performance package.

If your Mustang interior parts are in poor condition, CJ Pony Parts has thousands of replacement and upgrade options. Not only can we help give your interior a brand-new, straight-from-the-factory look, but there are hundreds of upgraded options so you can make your Mustang interior look totally your own.

Order this American Car Craft Brushed Stainless Steel 9-Piece Air Conditioning Vent Trim Kit with Etched Pony Logo for your 2015, 2016 or 2017 Mustang without the Performance Package from CJ Pony Parts today!

Similar Mustang Parts

similar Mustang parts More Consoles  

Mustang Applications

This product will fit the following Mustang years:

Product Reviews

Write a review
American Car Craft Air Conditioning Vent Trim 9-Piece Kit With Etched Pony Logo Brushed Stainless Steel Non-Performance Package 2015-2017 is rated 3.8 out of 5 by 6.
Rated 4 out of 5 by from Looks great I love the look of these vent Covers , they are very good quality. My only issue is that because the vents at not flat you need to form the Vent trim to fit , the main problem is they are a little thick and it's hard to push on the vents to make them conform. I ended up trying to preform the Trim pieces before applying them, even the Pony logo , which is a separate insert , will need to be bent a bit so it'll fit properly! If they made them just a bit thinner you can just press fit them on. But all in all I love the look , a little pricey in my opinion but a nice add on!
Date published: 2017-03-18
Rated 2 out of 5 by from obvious stick on look Very disappointed in these. The steel quality is good, but I was hoping they would have thin edges that completely hid the plastic flaps they cover. Not so. They are way short of covering the edge. Also, you have to bend them quite a bit to make them touch the plastic surface evenly. The pony is a separate piece, that comes out and you are supposed to bend it as well. I ended using only the outside circle pieces, which do cover that part. I left everything else off, so I have a nice overpriced metal vent frame. The pieces that stick on the flaps look very obvious, as they are thick and show the original plastic edges all around. Not worth the $86+ price.
Date published: 2017-01-09
Rated 2 out of 5 by from Isn't Custom Molded Would have been great if they were custom molded to fit exactly. The pieces are good looking, thick and well made... but they don't fit. These stainless steel plates come flat. Mustang vents are curved. You are required to bend them by hand in order to make complete contact that is nearly impossible due to the thickness of the plates. Once the adhesive is applied, there is a risk of incomplete adherence. For me, it was a waste of money, not worth the risk of damage to my vent.
Date published: 2017-02-09
Rated 5 out of 5 by from Great interior dress up Order these about 2 weeks ago, back order. CC call me to provide updates of ETA.Great service. Received them today and emmediatelt put them on. Five minutes. Measurement are slightly off to where the vents need assistance to get them open but nothing major, also the the vent covers are not exactly oval to mirror the vents. I'm impressed with the look.
Date published: 2016-10-29
Rated 5 out of 5 by from Looks awesome. Bought this and although i need to tweak it a bit to make it fit (the vent is a bit curved), the do look very nice on my RHD pony.
Date published: 2016-12-01
Rated 5 out of 5 by from Great apperance upgrade Installation is straight forward. However, you can not make a mistake aligning the pieces as there is no second chance,
Date published: 2016-12-15
  • y_2017, m_3, d_20, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_6
  • loc_en_US, sid_HW3605, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 14.2ms
  • REVIEWS, PRODUCT

Product Questions

These stick onto the existing vents with tape?

Asked by: rnrstar
Yes, they have an adhesive backing that is used for application.
Answered by: CJPP Dave
Date published: 2017-01-04

Now I'm confused. I have an EU Ecoboost 2016, PP, with three vents in the middle and no gauge. The 6-piece HW3604, only covers 2 vents. This one which covers 3 vents. Why are you recommending the 2 vent option? Which is right for me?

Asked by: RJMB
Sorry for the confusion, even though the RHD Mustangs are considered to have the Performance Pack, they do NOT have the gauges in the center of the dash. Because of this, you will need this part number.
Answered by: CJPP Dave
Date published: 2017-02-26

Will these fit the RHD Mustang? Not too sure if RHD Mustang is considered fitted with performance pack.

Asked by: Dtdazza
Yes, even though the RHD Mustangs are considered to have the Performance Pack, they do NOT have the gauges in the center of the dash. Because of this, you will need this part number.
Answered by: CJPP Dave
Date published: 2017-02-26
  • y_2017, m_3, d_21, h_4CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_3
  • loc_en_US, sid_HW3605, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 10.83ms
  • QUESTIONS, PRODUCT

You Might Also Like