Set of AMK Products Front Window Molding Hardware for all 1965 Coupe and Fastback Mustangs.
If you're restoring a classic 1965 Mustang Coupe or Fastback, then you're going to need the right hardware. After all, there's no sense in buying new trim or other new parts for your Pony if you don't have the correct clips and screws to mount and install them! So if you're putting new front window molding on your Mustang to replace molding that's rusty, damaged or missing, make sure you also pick up this Set of Front Window Molding Hardware by AMK Products, available from CJ Pony Parts!
This Set of AMK Product F-3558 Front Window Molding Hardware comes with 44 pieces total. This set of clips and screws will allow you to properly mount your new front window molding, and each piece will securely hold your new molding in place. The clips and screws look just like the original front window molding hardware found on your Mustang, so you'll still be able to retain the authenticity you don't want your beloved Pony to lose.
You can buy dozens of new parts for your Mustang. However, many of these new parts won't come with the appropriate hardware, or will expect you to reuse your old, rusted out hardware pieces. Well, if you're in either situation, the wide selection of AMK Products offered by CJ Pony Parts can fill the void and easily allow you to install your new Mustang parts with fresh, shiny, new hardware.
Order a Set of AMK Products F-3558 Front Window Molding Hardware for your 1965 Coupe or Fastback Mustang from CJ Pony Parts today!
Product ReviewsWrite a review
You Might Also Like
/** * Cases for simple product that is not on sale */ ?>CJ's Low Price:$19.99