AMK Products Master Chassis Kit With Drum Brakes 200 1970

AMK Products: 70Z-DRSS

Regular Price: $314.99

Special Price: $283.49

1417132800 24948
Earn 314 RPM Points What's this?
1416873600 1417392000
On Sale: Up to 30% Off Sale!
AMK Products Master Chassis Kit With Drum Brakes 200 1970

Product Description

AMK Products Master Chassis Kit for 1970 Mustangs with a 200 6-Cylinder Engine and Drum Brakes.

This Master Chassis Kit from AMK Products includes 331 total pieces of factory correct, OE style fasteners that are required to properly reassemble your 1970 Mustang's chassis in one convenient kit! The kit is specifically assembled for 1970 Mustangs with a 200 6-cylinder engine and drum brakes.

AMK Products' Master Chassis Kit includes individually packaged sets of hardware for various applications on your 1970 Mustang. Each package is thoroughly labeled so you know exactly where it goes on your Mustang. The individual sets of hardware also include the total number of pieces that are required for the specific application.

Master Chassis Kit Includes:
- Accelerator Bellcrank to Firewall: Hex Washer Head Sheet Metal Screws (2)
- Axle Housing to Springs: 5-3/4" U-Bolts, Flange Nuts (12)
- Axle Retainer Plates: Silver Cadmium Lock Nuts (8)
- Front Drum Brake Assembly to Spindle: T-Bolts, Lock Nuts (16)
- Brake Cables to Body: Retaining Clips, Hex Bolts (6)
- Brake Drum Retainers: Green Push-On Retainers (6)
- Front Drum Brake Hose Brackets to Body: Hex Washer Head Machine Screws (4)
- Drum Brake Hoses to Bracket: U-Clips (3)
- Brake Light Switch: Retaining Pin (1)
- Coil Spring Perches: Lock Nuts (4)
- Lower Control Arms to Shock Tower: Grade-8 Cam Bolts, Red Nuts, Washers (8)
- Upper Control Arms to Shock Tower: Grade-8 1/2"-13 Knurled Bolts, Red Nuts (12)
- Front Tubular Crossmember: Special Hex Countersunk Bolts (2)
- Differential Carrier to Housing: Red Lock Nuts, Copper Washers (20)
- Driveshaft: 5/16" U-Bolts, Lock Nuts (6)
- Engine Body Brackets: Unified Bearing Stress Flange Bolts and Nuts (12)
- Engine Insulator: Lock Nuts, Flat Washers (8)
- Engine Insulator to Block: Hex Screw and Split Washer Assembly (6)
- Single Exhaust Hanger: Hex Washer Head Machine Screws (8)
- Pop Open Gas Cap: Phillips Flat Sheet Metal Screws (4)
- Gas Tank: Hex Washer Head Sheet Metal Screws (11)
- Chassis Grease Plugs: Hex Plugs (9)
- Idler Arm: Hex Bolts, Lock Nuts, Clipped Washers (6)
- Front Eye Leaf Springs: Flange Bolts and Nuts (4)
- Master Cylinder with Power Brakes: Flange Nuts (2)
- Master Cylinder without Power Brakes: Hex Screw and Split Washer Assembly (2)
- Parking Brake Control to Body: Hex Washer Head Serrated Screws (3)
- Pitman Arm to Gear Box: Hex Jam Nut, Split Washer (2)
- Proportioning Valve to Apron: Unified Bearing Stress Flange Nuts (2)
- Rear Shackle Assembly: Unified Bearing Stress Flange Nuts (4)
- Front Shock Brackets: Lower Heavy-Duty Carriage Bolts, Flange Nuts (12)
- Front Shocks: Hex Screw/External Tooth Washer Assembly "ANCHOR", 5/16"-18 Nuts, Washers (12)
- Front Stabilizer Bar to Body: Hex Screw and Conical Spring Washer Assembly, Lock Nuts (8)
- Front Stabilizer End Links: Bolts, Retainers, Bushings, Spacers, Nuts (22)
- Steering Gear Box: Grade-8 Hex Bolts, Clipped Flat and Split Washers (9)
- Steering Linkage with Power Steering: Slotted Nuts, Cotter Pins, Flat Washer (23)
- Steering Rag Joint: 12-Point Bolt, 5/16"-18 Lock Nuts (3)
- Strut Rod Threaded Ends to Body: Lock Nuts (4)
- Strut Rods to Lower Control Arm: 1/2"-13 Special Knurled Bolts, Nuts, Pins (12)
- Transmission Crossmember: Unified Bearing Stress Flange Bolts and Nuts (4)
- Transmission Insulator: (8)
- Wheel Cylinders: 1/4"-20 Hex Screw and External Tooth Washer Assembly (8)

Buying individual sets of hardware for your 1970 Mustang can be expensive and time consuming if you're not sure which hardware you need. This Master Chassis Kit makes it easy by including 85% of the original, factory correct hardware that specifically fits your 1970 Mustang with a 200 I-6 engine and drum brakes. With a Master Chassis Kit from AMK Products, you will not only save time and money, but you will have the confidence knowing your 1970 Mustang is going to be restored with the finest factory correct hardware on the market.

AMK Products produces the most factory correct hardware for your classic Mustang. No matter what kind of Mustang you're building, there's no company better for nuts and bolts than AMK Products!

Similar Mustang Parts

similar mustang parts More Mustang Suspension Hardware  

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a Review

You Might Also Like