AMK Products Underhood Detailing Kit for all 1968 Mustangs.This Underhood Detailing Kit from AMK Products includes 173 total pieces of original style, factory correct fasteners that are intended to substantially improve the overall underhood appearance of your assembled 1968 Mustang in one convenient kit! If your newly restored 1968 Mustang is suffering from incorrect or unsightly mounting hardware under the hood, this kit is a must have for that final touch.
AMK Products' Underhood Detailing Kit includes individually packaged sets of hardware for numerous parts under the hood of your 1968 Mustang. Each package of hardware is thoroughly labeled so you know exactly where it goes on your Mustang. The individual sets of hardware also include the total number of pieces that are required for the specific application. This kit will work on all 1968 Mustangs.
Underhood Detailing Kit Includes:
- Air Cleaner Snorkel: Hex Washer Head Screws (2)
- Battery Hold Down Clamp: J-Hooks, Hex Washer Head Sheet Metal Screw, Nut/Conical Spring Washer Assembly (5)
- Cowl Braces to Cowl: Hex Flange Screw/Conical Spring Washer Assembly, Bolts, Flange Nuts (8)
- Fender Tops Only: Hex Screw/Conical Spring Washer Assembly (12)
- Front Shocks (Top Mount Only): Hex Screw/External Tooth Washer Assembly "Anchor" (4)
- Front Shock Brackets: Lower Heavy Duty Carriage Bolts, Flange Nuts (12)
- Grille: Hex Screw/Conical Spring Washer Assembly, Hex Washer Head Screws, Nuts (10)
- Grille Moldings (Pony and Corral): Stamped Nuts (18)
- Headlight Doors: Stainless Steel/Chrome Phillips Oval Head Screws, Nylon Nuts (12)
- Heater Assembly to Firewall: Stamped Nuts with Integral Sealer (4)
- Hood and Hinges: Hex Screw/Conical Spring Washer Assembly, J-Nuts (14)
- Hood Latch and Catch: Hex Screw/Conical Spring Washer Assembly, J-Nuts (5)
- Hood Latch Support: Hex Screw/Conical Spring Washer Assembly (3)
- Horns: Hex Screw/Conical Spring Washer Assembly, Serrated Flange Nuts (4)
- Radiator Fan Shroud: Special Hex Washer Head Screws, Spring Nuts (8)
- Radio Hood Ground: Hex Washer Head Sheet Metal Screw (1)
- Shock Tower Braces: Hex Screw/Conical Spring Washer Assembly, Flange Nuts (24)
- Starter Solenoid: Hex Washer Head Sheet Metal Screws "D" (2)
- Voltage Regulator: Hex Washer Head Sheet Metal Screws "D", External Washer (3)
- Washer Nozzles and Tee: Hex Washer Head Sheet Metal Screws (3)
- Windshield Washer Bottle: Hex Washer Head Sheet Metal Screws (3)
- Wiring for Horns and Regulator: 3-1/8" Nylon Straps (5)
- Wiring to Driver Side Aprons: 4" Nylon Straps (6)
- Wiring to Firewall: 4" Nylon Straps (1 for Washer Hose) (3)
- Wiring to Passenger Side Apron Below Relay: D-Shaped Nylon Retainers (2)
Buying individual sets of hardware for under the hood of your 1968 Mustang can be expensive and time consuming if you're not sure which hardware you need. This Underhood Detailing Kit makes it easy by including factory correct fasteners that specifically fit your 1968 Mustang. With an Underhood Detailing Kit from AMK Products, you will not only save time and money, but you will have the confidence knowing that the parts under the hood of your 1968 Mustang will be fastened or assembled with the finest hardware on the market.
AMK Products produces the most factory correct hardware for your classic Mustang. No matter what kind of Mustang you're building, there's no company better for nuts and bolts than AMK Products!
*Not for use on 1968 Shelbys, Shelby specific kits are available.
Similar Mustang PartsMore Mustang Engine Hardware
This product will fit the following Ford Mustang years:
Product ReviewsWrite a review
You Might Also Like
CJ's Low Price:$349.99
Regular Price: $349.99
Special Price: $297.77
CJ's Low Price:$324.99