Anderson Composites Hood Ram Air Carbon Fiber V6/EcoBoost/GT 2015-2017

Anderson Composites: AC-HD15FDMU-AB
MSRP: $1,559.00
CJ's Low Price:
$1,403.10
1481328000 63206
Combine this great Anderson Composites carbon fiber front splitter with the order of your new ram air hood!
Earn 1403 RPM Points What's this?
Anderson Composites Hood Ram Air Carbon Fiber V6/EcoBoost/GT 2015-2017
Anderson Composites Hood Ram Air Carbon Fiber V6/EcoBoost/GT 2015-2017 Anderson Composites Hood Ram Air Carbon Fiber V6/EcoBoost/GT 2015-2017 Anderson Composites Hood Ram Air Carbon Fiber V6/EcoBoost/GT 2015-2017 Anderson Composites Hood Ram Air Carbon Fiber V6/EcoBoost/GT 2015-2017 Anderson Composites Hood Ram Air Carbon Fiber V6/EcoBoost/GT 2015-2017 Anderson Composites Hood Ram Air Carbon Fiber V6/EcoBoost/GT 2015-2017 Anderson Composites Hood Ram Air Carbon Fiber V6/EcoBoost/GT 2015-2017 Anderson Composites Hood Ram Air Carbon Fiber V6/EcoBoost/GT 2015-2017 Play Anderson Composites Hood Ram Air Carbon Fiber V6/EcoBoost/GT 2015-2017 Video 1
Anderson Composites

Product Description

Anderson Composites Carbon Fiber Ram Air Hood for 2015, 2016 and 2017 V6, EcoBoost and GT Mustangs.

Bring cool air into your 2015-2017 V6, EcoBoost or GT Mustangs engine bay, and push hot air out with this Anderson Composites Carbon Fiber Ram Air Hood AC-HD15FDMU-AB from CJ Pony Parts! This hood will give your Mustang a stylish new look while helping to keep your engine cool.

Features and Benefits:
- Ram air scoop and heat extractors
- High-quality wet carbon fiber construction
- Lightweight and strong 1-piece design
- Durable high-gloss finish
- Direct OE factory hood replacement
- Reuses factory hardware
- Retains factory mounting locations
- Requires no additional modifications for installation

The ram air design of this carbon fiber hood helps to bring more cold air into your 2015-2017 Mustangs engine bay, while side heat extractor vents pull heat out, allowing your engine to run more cool. The hood itself is constructed from high-quality wet carbon fiber for a strong, lightweight design. A high-gloss finish gives it a brilliant shine for a stylish custom look. Installation of the hood is made simple by reuse of the factory hardware and mounting locations. No cutting, drilling or other additional modifications need to be done for installation.

*This hood will NOT fit GT350 or GT350R.
*This hood does NOT allow use of 2016 OE hood turn signals.

Please Note: It is highly recommended to use an automotive clear with UV inhibitors to prolong the life and finish of the product.

Anderson Composites specializes in fiberglass and carbon fiber components for late-model Mustangs. They manufacture each and every one of their products with the utmost attention to detail and only use top-grade materials for a quality product you can trust. Their extensive manufacturing experience allows them to construct everything from hoods, trunk lids, front and rear spoilers, side skirts/splitters and much more. Anderson Composites’ precision and attention to detail used to make their products is a science of its own and their craftsmanship is simply unmatched.

Order this Anderson Composites AC-HD15FDMU-AB Carbon Fiber Ram Air Hood for your 2015-2017 V6, EcoBoost or GT Mustang from CJ Pony Parts today!

Similar Mustang Parts

similar Mustang parts More Hoods  

Installation Instructions

Mustang Installation

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a review
Anderson Composites Hood Ram Air Carbon Fiber V6/EcoBoost/GT 2015-2017 is rated 5.0 out of 5 by 1.
Rated 5 out of 5 by from Excellent Fit and Finish! This was one of my first upgrade in the summer as the heat from my supercharger was getting annoying hot. Great heat extractors and very little water actually goes in (left it out for a day in the rain). Fitment was great and very easy to install. I think preparing the hood was a lot harder than installing it. I added a heat shield and drilled holes for the water factory water crawl. I also heat shielded the washer fluid lines since it was going to be right on top of the supercharger. I had hood struts, but followed the Anderson's Composite recommendation of not using them and made holes for hood pins. I had the hood clear bra with Xpel Ultimate also to protect this beautiful piece. I didn't get a weight on it, but it certainty feels lighter than factory because I was able to lift it myself with less strength than the factory.
Date published: 2016-11-16
  • y_2016, m_12, d_9, h_12
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_HD158, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 95.29ms
  • REVIEWS, PRODUCT

Product Questions

I want tHis hood but is it in stock and how long to jersey would it take?

Asked by: Roy the boy toy
This is in stock at this time, we do not have an estimated delivery time on truck freight items.
Answered by: rk cjpp
Date published: 2016-12-05

Does the hood come with Hood Pin holes? If not, can these be drilled without damaging the finish?

Asked by: Madbill786
This does not come with hood pin holes. We recommend having a professional drill through the carbon fiber.
Answered by: CJPP Dave
Date published: 2016-09-19

Would it be suitable to ship this hood internationally?

Asked by: Geffro70
Yes.
Answered by: CJPP Dave
Date published: 2016-09-07

1st) Can this part get paint with the same colour of the car? 2nd) They will be on market hoods like this that they wont be made by carbon?

Asked by: Jas0n Lazlo
Yes, this can be painted. So far Anderson is only offering their hoods in Carbon Fiber. We do have hoods in fiberglass from other manufactures.
Answered by: Rick CJs
Date published: 2016-05-25

Does it require some kind of windshield washer relocation kit? Installation time estimate? It looks sweet, what special care does it require?

Asked by: Leosim
The manufacturer does not specify a washer relocation kit, it shouldn't take more than a couple of hours to install if that. For the most part, you can and should care for your carbon fiber components no differently than you do your painted surfaces. You wash them the same as you would paint, you can polish them to remove swirls and increase gloss, and you can wax and seal them just the same as well.
Answered by: rk cjpp
Date published: 2016-04-27

how will I be able to wash my car with this hood if there is a possibility that water might enter the vents?

Asked by: anavrrr
You would wash your car as you normally would. Of course some water will get in the engine bay, but it is not different than driving in a heavy rain. If you are that worried about it, just cover the engine bay parts and components that you are concerned about with a towel or plastic when washing.
Answered by: CJPP Dave
Date published: 2016-03-24

I'm very interested in purchasing this hood. Looks really sweet but wondering how long until it's release date  ?

Asked by: Tim stansel
It is available now. We ship them directly from the manufacturer.
Answered by: CJPP Dave
Date published: 2016-03-16

Hi I'm considering to buy this hood. My only concern will water enter the engine? esp when it rain? thank you.

Asked by: mustangers05
It is possible that water could enter the engine compartment.
Answered by: rk cjpp
Date published: 2016-03-15
  • 2016-12-10T08:04CST
  • bvseo_cps, prod_bvqa, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_12
  • loc_en_US, sid_HD158, PRD, sort_recentAnswersFirst
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 197.31ms
  • QUESTIONS, PRODUCT

You Might Also Like