Anderson Composites Carbon Fiber Type-ST Trunk Lid with Spoiler for all 2015, 2016 and 2017 Fastback Mustangs.
Change up the style of your 2015-2017 Fastback Mustang by adding some high-quality carbon fiber to it. This Anderson Composites Carbon Fiber Type-ST Trunk Lid with Spoiler AC-TL15FDMU-SA from CJ Pony Parts is a great way to get some weight reduction while giving your Mustang a whole new rear end appearance.
Features and Benefits:
- High-quality wet carbon fiber construction
- Lightweight and strong one-piece design
- Durable high-gloss finish
- Built-in spoiler
- Integrates use of back up camera in trunk lid
- Reuses factory hardware and mounting locations
- No additional modifications required
- Fits ALL 2015-2017 Fastback Mustangs
This trunk lid is manufactured by Anderson Composites using a wet carbon fiber construction, and features a built-in spoiler that flows with the 2015-2017 Fastback Mustang body lines. This gives the trunk lid a one-piece design that is both lightweight and strong for long lasting durability. To give it that bright shine, the trunk lid features a high-gloss finish. The factory tail light panel is eliminated with this trunk lid, but still allows use of the backup camera. By reusing the factory hardware and mounting locations, this trunk lid requires no additional modifications to your Fastback Mustang such as cutting or drilling to install.
*This trunk lid does NOT fit convertible models.
Please Note: It is highly recommended to use an automotive clear with UV inhibitors to prolong the life and finish of the product.
Anderson Composites specializes in fiberglass and carbon fiber components for late-model Mustangs. They manufacture each and every one of their products with the utmost attention to detail and only use top-grade materials for a quality product you can trust. Their extensive manufacturing experience allows them to construct everything from hoods, trunk lids, front and rear spoilers, side skirts/splitters and much more. Anderson Composites’ precision and attention to detail used to make their products is a science of its own and their craftsmanship is simply unmatched.
Order this Anderson Composites AC-TL15FDMU-SA Carbon Fiber Type-ST Trunk Lid with Spoiler for your 2015, 2016 or 2017 Fastback Mustang from CJ Pony Parts today!
Product ReviewsWrite a review
Do you also offer the carbon fibre piece arround the taillights so they are matching to the decklid panel like on the pictures?
Will this lid fit the convertible. ...I looked on ford's parts website and the part number is the same for both convertible and fastback?
Does this trunk allow the use of the inner lining and backup camera?
Will this trunk seal up the same way as the original, what is the actual weight of this piece, any warranty?
You Might Also Like
/** * Cases for simple product that is not on sale */ ?>CJ's Low Price:$1,403.10
/** * Cases for simple product that is not on sale */ ?>CJ's Low Price:$464.10
/** * Cases for simple product that is not on sale */ ?>CJ's Low Price:$401.10
/** * Cases for simple product that is not on sale */ ?>CJ's Low Price:$338.10
It's a direct replacement trunk lid. Gets rid of the tail light panel, it's all one piece, and with the built in spoiler, that's a really nice look to these cars. For this installation today, small plastic pry bar, quarter inch ratchet, 5.5 millimeter socket, 10 millimeter deep socket, short extension, and a small Phillips head screw driver.
Begin installation by removing this inner panel. To do that, you have to unthread these, pop this off, and then pop all these little plastic clips. Next, remove the wiring harness. We're going to unplug it from the backup camera first, unplug from the trunk release, and remove all these little plastic plugs. Just like on the hood, it's a lot easier to do this with a second set of hands. You can do it yourself, because it is fairly light, but it is large, and kind of cumbersome.
Now, with the trunk off the car, now we're going to transfer some parts over. We're going to start with the latch. Next, we're going to move over is the backup camera. Then you want to grab these rubber seals, and also these plastic covers. Now, our Anderson Composites truck lid is ready to install on the car.
Going to line it up to the original latches. Remember, you don't have to crank these real tight, just get them snug. We're going to plug the harness back in. Then the cover can go back on. Then we can reinstall the stops. Then, lastly, the latch cover.
The first time you close it, you just want to make sure and adjust those bump stops, and make sure it's not touching. We're good, and your installation's finished.
The Anderson Composites carbon fiber trunk lid looks probably as good, if not better, on the magnetic, as it looked on our SEMA car. Fit and finish, as always, is spot on. The installation is very simple, figure about an hour, be back on the road in no time.