AOD Automatic Conversion Kit 289/302/351W 1965-1966

CJ's Part Number: AODCK3
MSRP: $4,596.08
CJ's Low Price:
$3,467.99
1490486400 1827
When your purchase this complete AOD Conversion kit you might be interested in the items listed below.

Regular Price: $464.99

Special Price: $441.74

Qty

Regular Price: $59.99

Special Price: $41.99

Qty
Earn 3467 RPM Points What's this?
AOD Automatic Conversion Kit 289/302/351W 1965-1966

Product Description

AOD Automatic Conversion Kit for 1965-1966 Mustangs with a 289, 302 or 351W Engine.

Are you in the market to replace your old, worn out transmission with a more modern AOD transmission? This AOD conversion kit comes with everything needed to convert your Automatic Mustang to a more Modern AOD System. The AOD conversion kit will work on all 1965-1966 Mustangs. This AOD transmission from Performance Automatic was dyno tested and rated for 450 horsepower.

Kit Includes:
- Performance Automatic AOD Transmission
- Transmission Dipstick
- Transmission Dipstick Tube
- 2200-2400 Stall Torque Converter
- Chrome Transmission Pan
- 164T Flex Plate
- Kick Down Cable
- Transmission Cross Member
- Transmission Mount
- AOD Shifter Linkage
- AOD Slip Yoke

Please Note: This AOD Conversion Kit will not work on 1979-1995 5.0L Engine.

*The flex plate is 28.2oz balanced so it will only work on 28.2oz balanced motors.

The Performance Automatic transmission is ready to install in your 1965-1966 Mustang. The transmission bell housing will work on 1965-1966 Mustangs with a 289, 302 or a 351W Engine. Performance Automatic upgrades the internals with an extra wide overdrive band, diode pack and extra 3-4 clutches making this an excellent swap into an earlier Ford.

Because of their age, transmissions in classic Mustangs can be in a huge variety of conditions, depending on how well they've been maintained and used. Some are in need of many transmission parts in order to keep working well, while others desperately need completely replaced. CJ Pony Parts has hundreds of parts for 1965-1973 Mustang transmissions, which will allow any owner to find what they need for any transmission project.

Purchase an AOD Automatic Conversion Kit for your 1965-1966 Mustang with a 289, 302 or 351W Engine from CJ Pony Parts today!

Similar Mustang Parts

similar Mustang parts More AOD Conversion Kits  

Installation Instructions

Mustang Installation

Mustang Applications

This product will fit the following Mustang years:

Product Reviews

Write a review
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 5.43ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

Product Questions

I just purchased this kit (aod-automatic-conversion-kit-289-302-351w-1965-1966/p/AODCK3.) Is the Part # DS7 Driveshaft Aluminum 50" AOD/T-5 Conversion V8 1965-1970 required to make this work? or will it work with the stock driveshaft?

Asked by: Naty8
You will need a 50 inch driveshaft.
Answered by: rk cjpp
Date published: 2017-01-30

What is the difference between the "Performance Automatic AOD Transmission Street Smart Package 289/302/351" / "AOD Conversion Kit 1964-1966" and the "AOD Automatic Conversion Kit 289/302/351W 1965-1966" besides the price ?

Asked by: aikidokat
the PASS53103 (Street Smart ) is just the trans. The AODCK3 ( Conversion Kit ) is the whole conversion kit including the PASS53103 trans
Answered by: aikidokat
Date published: 2017-01-19

On a 66 Mustang, Going to a AOD, What gear ratio should I use in the rear end? I now have 2.80

Asked by: Ken 66
Depending on what kind of driving you will be doing, a set of 3.25 or 3.55 would work for just street driving, you would want to go higher if doing any kind of racing.
Answered by: rk cjpp
Date published: 2016-12-30

Would this kit work with a FORD 289 4.6 V8 66-68 COMP ENGINE. 6 BOLT BELLHOUSING?

Asked by: Danny93
Yes it will.
Answered by: rk cjpp
Date published: 2016-12-08

So this transmission has a 1st, 2nd, 3rd, and 4th gear and then reverse correct?

Asked by: Naty8
This has 4 forward gears and reverse.
Answered by: rk cjpp
Date published: 2016-11-03

Is this transmission a 3 speed with overdrive ??

Asked by: Wilson 10
Yes it is.
Answered by: rk cjpp
Date published: 2016-10-03

Can this transmission kit be used on 5.0liter 50 oz balance engine, if I use my 164 tooth 50 oz flexplate?

Asked by: joe2698
If using this transmission in a 65-66 mustang with a 50 oz balance carbureted engine you will need to use a 50 oz balance flywheel. If using it in any other year, some of the kits components will not work like the crossmember and shifter linkage.
Answered by: rk cjpp
Date published: 2016-09-15

Please tell me the gear ratio of the OD

Asked by: inessiness99
The overdrive gear is .67:1.
Answered by: rk cjpp
Date published: 2016-06-17
  • y_2017, m_3, d_24, h_18CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_18
  • loc_en_US, sid_AODCK3, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 15.53ms
  • QUESTIONS, PRODUCT

You Might Also Like