AOD Automatic Conversion Kit 289/302/351W 1967-1970

CJ's Part Number: AODCK4
MSRP: $4,595.08
CJ's Low Price:
1477612800 1828
Purchase the items listed below to help with the installation of this AOD Transmission kit.
CJ's Low Price:
Earn 3466 RPM Points What's this?
AOD Automatic Conversion Kit 289/302/351W 1967-1970

Product Description

AOD Automatic Conversion Kit for 1967, 1968, 1969 and 1970 Mustangs with a 289, 302 or 351W Engine.

Are you ready to upgrade the transmission in your 1967-1970 Mustang? If this AOD transmission conversion kit is for you. This kit comes complete with everything needed to properly install a more modern automatic transmission in your Mustang. This Performance Automatic Transmission is rated at 450 horsepower.

The Performance Automatic transmission is a brand new transmission that is ready to install in your 1967, 1968, 1969 or 1970 Mustang. The transmission will work on 1967-1970 Mustangs with a 289, 302 or a 351W Engine. Performance Automatic upgrades the internals with an extra wide overdrive band, diode pack and extra 3-4 clutches making this an excellent swap into an earlier Ford.

Kit Includes:
- Performance Automatic AOD Transmission
- Transmission Dipstick
- Transmission Dipstick Tube
- 2200-2400 Stall Torque Converter
- Chrome Transmission Pan
- 164T Flex Plate
- Kick Down Cable
- Transmission Cross Member
- Transmission Mount
- AOD Shifter Linkage
- AOD Slip Yoke

*The flex plate is 28.2oz balanced so it will only work on 28.2oz balanced motors.

Please Note: This AOD Conversion Kit will not work on 1979-1995 5.0L Engine.

Because of their age, transmissions in classic Mustangs can be in a huge variety of conditions, depending on how well they've been maintained and used. Some are in need of many transmission parts in order to keep working well, while others desperately need completely replaced. CJ Pony Parts has hundreds of parts for 1965-1973 Mustang transmissions, which will allow any owner to find what they need for any transmission project.

Purchase a new AOD Automatic Conversion Kit for your 1967, 1968, 1969 or 1970 Mustang with a 289, 302 or 351W Engine from CJ Pony Parts today!

Similar Mustang Parts

similar Mustang parts More AOD Conversion Kits  

Installation Instructions

Mustang Installation

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a review
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 127.49ms
  • bvseo-msg: HTTP status code of 403 was returned;

Product Questions

Hi, when you install this kit into a 67 fastback how do you shift into overdrive...I assume it's by pressing a button, as i'd like to keep the original shifter & console in place?

Asked by: JohnA in SA
The kit includes a shifter linkage so you can use the stock shifter.
Answered by: rk cjpp
Date published: 2016-09-08

Will the bell housing fit on a 289 or will i have to order a seperate one?

Asked by: 68coupe289
The bellhousing is part of the transmission housing, as long as your engine has 6 bolts holding the transmission to the engine this transmission will bolt up.
Answered by: rk cjpp
Date published: 2016-01-14

Hi i have 1969 mustang mach 1 with 390 engine and c6 trans dose the kit fit ?

Asked by: ruck69
This conversion kit is for small block engines.
Answered by: rk cjpp
Date published: 2015-10-08

I have a  '70 Mustang Convertible, 302 ci 2 barrel with 3 speed manual transmission.  Will this kit work for a AOD swap?  What else would I need?  Also, if I later decided to swap the 302ci to a 5.0L EFI, what else is needed?  

Asked by: KB19203
This kit is for a C4 to AOD swap. You might need quite a bit more. The 302 to 5.0 should be OK though, once you're to an AOD.
Answered by: CJ Pony Parts
Date published: 2015-08-07

I own a 67 Fastback, 351W (400hp), C4, 4:11 traction lock rear end.  Does this kit require a shortened driveshaft?  If so would you recommend the aluminum driveshaft?  Would I need to relocate the shifter?   Thanks!

Asked by: 67FastbackKent
It includes everything you need, and I don't see a driveshaft on the list, so you should be good there. You won't need to relocate the shifter.
Answered by: CJ Pony Parts
Date published: 2015-07-27

Hey! I have a 1970 Mercury Cougar with 351C 2V engine and FMX transmission. What complete kit do you recommend for this?

Asked by: Cyrille
Unfortunately, we don't have anything for FMX to AOD conversions.
Answered by: CJ Pony Parts
Date published: 2015-07-20

I have a manual 3 speed. What else would I need to make this conversion to AOD?

Asked by: cadillacman
This only works when converting a C4 to an AOD.
Answered by: CJ Pony Parts
Date published: 2015-07-14

I have a 72 convertible looking to update to a over - drive. Any help? Thanks

Asked by: Doorslave
Unfortunately, we don't have any AOD conversion kits for 1971-1973 Mustangs. You might be able to try something custom, but we don't have any specific recommendations.
Answered by: CJ Pony Parts
Date published: 2015-05-15
  • 2016-10-28T08:21CST
  • bvseo_cps, prod_bvqa, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_13
  • loc_en_US, sid_AODCK4, PRD, sort_recentAnswersFirst
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 179.14ms

You Might Also Like