ARP 3 Inch Rear Wheel Studs for all 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 and 2004 Mustangs.
Replace your broken or missing factory lug studs with this set of extended wheel studs from ARP. These extended wheel studs are made from 8740 chromoly steel which meets NHRA requirements for safety to prevent a possible lug nut or stud failure. This set of rear wheel studs features a 3 inch threaded length stud with a knurl length of 0.400 in.
- Press-in design
- Made from 8740 chromoly steel
- Rated at 190,000 psi
- Cadmium plated finish
- Made in USA
These ARP extended wheel studs are cadmium plated preventing corrosion build up on the wheel stud. These high quality wheel studs are hardened to a tensile strength of 190,000 psi to provide superior strength. Tensile strength is the maximum stress that a material can withstand while being stretched or pulled before failing or breaking.
*This set of extended wheel studs from ARP will need to have open ended lug nuts
The Mustang is held together by a myriad of nuts, bolts and screws, which allow it to work despite the incredible pressures and forces acting upon it. However, what happens if that hardware fails, or you need to upgrade it to handle additional performance? With the hardware from ARP, you're getting the best products on the market, and those trusted by Formula 1, Indy Car, NHRA and NASCAR. So with that being said, you know you are getting the best hardware money could buy.
Similar Mustang PartsMore Mustang Parts
Product ReviewsWrite a review
ARP #100-7703 / ARP Wheel Studs Rear 3 Inch 1965-2004 / knurl length of 0.400 in. Can you tell me the Knurl diameter? I want similar studs for the front rotors of a 68 Mustang. thx
How many studs come in a pack?
I need a 10m lug bolt 1.25 thread 2" or longer. Do you have anything?
You Might Also Like