ATP Turbo 3" Stainless Steel Off-Road Downpipe for all 2013, 2014, 2015 and 2016 Focus STs.
Increase exhaust flow right off the turbo with a 3" ATP Turbo downpipe. ATP Turbo's downpipes are made from pure mandrel bent 304 stainless steel including flanges. The downpipe is fitted with two O2 bungs in the stock locations as well as one extra bung and plug for future wideband tuning use.
ATP Turbo's downpipe features a full 3" diameter without reduction for the best possible flow. This downpipe has been proven to be effective on 2013-2016 Focus STs with a stock turbo or when used with ATP Turbo bolt-on GT/GTX turbos for use beyond 400 HP. Just like the ATP Turbo front mount intercooler upgrade, this downpipe is built to be used for Focus STs pushing up to 600 HP.
- 3" diameter
- Full stainless steel construction
- Includes two O2 bungs in the stock locations and one extra bung and plug for wideband use
- Works with applications pushing up to 600 HP
This downpipe supports Focus STs regardless of HP. Whether you're just looking to free up exhaust flow on your stock ST or you're shooting for big power numbers, the downpipe fits the bill from mild to wild. Never again will you have to invest in an upgraded downpipe. The ATP downpipe is the key ingredient to pushing your Focus ST into the 12s.
*Off-road downpipes are designed without a catalytic converter and are intended for off-road, race use only.
Tech Tip: The flange on this 3" downpipe will work with smaller diameter cat-back exhaust systems, such as 2-1/4" and 2-1/2". CJ Pony Parts has installed a variety of 3" downpipes onto smaller diameter cat-back systems without any issues.
Order ATP Turbo's 3" Stainless Steel Off-Road Downpipe for your 2013, 2014, 2015 or 2016 Focus ST from CJ Pony Parts today!
Product ReviewsWrite a review
Will this down pipe cause the engine light to come on since it don't have a cat. I have a acesss port tuner
Dose this fit the 2016 focus rs to a magnaflow exhaust
I have the agency exhaust system .does this down pipe come with the extension pipe.
Will this fit in the American,thunder flowmaster exhaust
Will this fit my 2016 Ford Focus se sport package edition?
Will it fit any Ford fusion Models? If so I have a 2015 Ford Fusion SE 2.0 Ecoboost, will this work? If not do you have one that will? If so please give part number.
Will it work with stock catback exhaust?
Will i be able to fit a mbrp exhaust on this down pipe? With no problems?
You Might Also Like
CJ's Low Price:$644.99
CJ's Low Price:$599.00
CJ's Low Price:$569.99
CJ's Low Price:$419.99
This 3" downpipe is made of mandrel bent 304 stainless steel. It does not have a catalytic converter, making it for off-road use only. It's going to install on the factory location using the factory hardware along with the supplied new gasket. You have two locations for your factory oxygen sensors along with a third location for use with a wide band O2 sensor. If you're not using a wide band, you can use the supplied plug for the additional bung. This will work with either your stock turbo or an aftermarket ATP turbo.
Along with custom tuning, this ATP downpipe is a great way to add some horsepower to your Focus ST.