Baer Bumpsteer Kit Manual Steering V8 1965-1966

Baer Brakes: 3261001
MSRP: $194.45
CJ's Low Price:
1464652800 3446
Earn 175 RPM Points What's this?
Baer Bumpsteer Kit Manual Steering V8 1965-1966
Baer Brakes

Product Description

Baer V8 Bumpsteer Kit for 1965-1966 Mustangs with Manual Steering.

Understanding Bump Steer:
Lowering a vehicle or altering its caster and or camber can lead to unsafe driving conditions, commonly called "bump steer." Simple maneuvers, such as hard braking, cornering or traveling over road-surface irregularities, can cause the vehicle to dart in an unexpected direction. Baer Trackers can solve this problem! The pin-height-adjustable tie rods allow compensation for ride height and suspension geometry changes, enabling a more optimal range of articulation between the tie rod and the steering arm. Steering geometry is optimized and bump steer is eradicated. To adjust the tie rod height, simply move the steel spacers from top to bottom on either side of the spherical bearings.

- Hardened chrome-moly pins
- Teflon-lined chrome-moly spherical bearings
- Aluminum sleeves

- Pair of tapered pins
- Shim set
- Pair of Teflon lined Heims
- Nylock, lock nuts for pin end and jam nuts as needed per application.
- Instructions

Smooth out those bumps in the road, plus improve the handling and overall driving performance of your car with a new bump steer kit from CJ Pony Parts. CJ Pony Parts carries kits for all models and years. If you’re not sure which bump steer kit is right for your vehicle, you can always contact one of our knowledgeable product specialists for expert guidance. We’ll never steer you wrong at CJ Pony Parts!

Order your Baer V8 Bumpsteer Kit for 1965-1966 Mustangs with Manual Steering from CJ Pony Parts today!

Similar Mustang Parts

similar Mustang parts More Restomod Suspension  

Installation Instructions

Mustang Installation

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a review
  • bvseo_sdk, p_sdk, 3.1.0
  • CLOUD, getContent, 85.69ms
  • bvseo-msg: HTTP status code of 403 was returned;

Product Questions

Will this kit work on my 1966 mustang . I installed a Flaming River manual rack & pinion along with a Pro motorsports Neg. Wedge kit about 8 years ago. The steering was way out of whack. It sat for 8 years, I now want to make it drivable.

Asked by: Tom G
With all of those custom options, I'd recommend contacting sales team member (1-800-888-6473), and they can walk you through fitment. It's a little more involved than I can cover here.
Answered by: CJ Pony Parts
Date published: 2015-04-24

Will this Baer bump steer kit FIT MY 66 Mustang with Granada disc brakes & spindle's , that has Shelby1'' drop, roller perched ,and adjustable strut rod's & ASI gas shocks , If I remember correctly I think I may have Granada tie rod ends

Asked by: fgl350
  • 2016-05-31T08:37CST
  • bvseo_cps, prod_bvqa, vn_cps_3.2.1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_en_US, sid_BSK1, PRD, sort_recentAnswersFirst
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.1.0
  • CLOUD, getContent, 5.78ms

You Might Also Like