Battery Apron Repair Kit 1964-1973

CJ's Part Number: BARK-V
MSRP: $52.95
From:

Regular Price: $51.99

Special Price: $38.99

1418947200 41224
Earn 51 RPM Points What's this?
1391126400 1391126400
On Sale: End of Year Blowout!
BARK-V
BARK-V Play Battery Apron Repair Kit 1964-1973 Video 1

Product Description

Battery apron repair kit for your 1964-1973 Mustang.

Kit Includes:
-Battery Apron
-Battery Tray & Hardware
-Battery Tray Clamp & Hardware

Similar Mustang Parts

similar mustang parts More Mustang Fender Aprons  

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a Review
Works
If you are building a show car go find a used one and spend a lot of time de-rusting, cleaning, and massaging out all the little imperfections, or buy this and have a part that fits well and looks good.
LeRoi November 22, 2014
bad repo
ripples everywhere
nathan July 11, 2013
Typical aftermarket
Depending what level or car your trying to produce this part may or may not work. The ripples you see in the apron is how it is (not in original) and the folds in the metal are not the same as OE (rounded edges vs pointed) Also, the large hole for the headlights wire harness is over-sized and not in the exact spot. If your trying to produce a high class show car, try and salvage what original metal is there or get yourself a good body man who can fabricate higher quality. Otherwise for the driver or hobby show car guy they do the job and are far better than rusted out OE.
Phegasus March 10, 2012
perfect match
just like the original fits great, the original was rusted out and this fit great and at a great price too
Andrew March 10, 2012
none
bought this kit and installed it with very little alteration.THe fit was almost perfect,needed a little trimming to fit properly.
Ralph Morio March 10, 2012
5 Results

Product Video

By Bill Tumas: We're here with our battery apron repair kit for your '64 through '66 Mustang Coupe, Convertible, or Fastback. Our kit comes with everything needed to replace that often rusted area on your early Mustang. The kit includes the correct style group-24 battery tray, a brand new hold down clamp, and all the hardware for the clamp as well.

The battery apron comes ready to weld on. It's predrilled for all of the additional accessories, as well as including hardware, pre-drilled holes for your fender mounting brackets, your battery terminal rubber shield, starter solenoid, precut hole for your wiring harness, and pre-drilled for the battery tray mounting hardware.

Here you can see our battery apron installed on a 1965 Mustang Coupe. You can see it welds to the side of the shock tower, top of the frame rail down here, and welds into your radio support in the front. The battery tray is going to mount right here in the front corner.

Because of battery acid, many times the battery tray is going to rust out first. It's a good opportunity to remove the battery tray and check your apron before you order replacement parts.