Battery Hold Down Clamp Bolt with Nut 1965-1966

CJ's Part Number: HW232

Regular Price: $1.99

Special Price: $1.39

1417046400 19304
Earn 1 RPM Points What's this?
1416873600 1417392000
On Sale: Up to 30% Off Sale!
Battery Hold Down Clamp Bolt with Nut 1965-1966
Play Battery Hold Down Clamp Bolt with Nut 1965-1966 Video 1

Product Description

Battery Hold Down Clamp Bolt with Nut for 1965-1966 Mustangs.

This Battery Hold Down Clamp Bolt was made to hold the battery to the battery tray. The bolt is either sold by itself with two nuts or in the battery hold down kit.

*NOTE: This bolt will work with 24F (short clamp) and 22F (long clamp) Battery Hold Down Clamps.

Similar Mustang Parts

similar mustang parts More Mustang Engine Hardware  

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a Review

You Might Also Like

Product Video

By Bill Tumas: We're here with our battery apron repair kit for your '64 through '66 Mustang Coupe, Convertible, or Fastback. Our kit comes with everything needed to replace that often rusted area on your early Mustang. The kit includes the correct style group-24 battery tray, a brand new hold down clamp, and all the hardware for the clamp as well.

The battery apron comes ready to weld on. It's predrilled for all of the additional accessories, as well as including hardware, pre-drilled holes for your fender mounting brackets, your battery terminal rubber shield, starter solenoid, precut hole for your wiring harness, and pre-drilled for the battery tray mounting hardware.

Here you can see our battery apron installed on a 1965 Mustang Coupe. You can see it welds to the side of the shock tower, top of the frame rail down here, and welds into your radio support in the front. The battery tray is going to mount right here in the front corner.

Because of battery acid, many times the battery tray is going to rust out first. It's a good opportunity to remove the battery tray and check your apron before you order replacement parts.