Battery Hold Down with Short Clamp for 1965-1966 Mustangs.
This clamp is for use with a 24F size battery. Keep your battery clamped down with no worries. This is a direct replacement.
We're here with our battery apron repair kit for your '64 through '66 Mustang Coupe, Convertible, or Fastback. Our kit comes with everything needed to replace that often rusted area on your early Mustang. The kit includes the correct style group-24 battery tray, a brand new hold down clamp, and all the hardware for the clamp as well.
The battery apron comes ready to weld on. It's predrilled for all of the additional accessories, as well as including hardware, pre-drilled holes for your fender mounting brackets, your battery terminal rubber shield, starter solenoid, precut hole for your wiring harness, and pre-drilled for the battery tray mounting hardware.
Here you can see our battery apron installed on a 1965 Mustang Coupe. You can see it welds to the side of the shock tower, top of the frame rail down here, and welds into your radio support in the front. The battery tray is going to mount right here in the front corner.
Because of battery acid, many times the battery tray is going to rust out first. It's a good opportunity to remove the battery tray and check your apron before you order replacement parts.