Battery Tray 1965-1966

CJ's Part Number: BT1
CJ's Low Price:
$11.99
1416528000 3499
Earn 11 RPM Points What's this?
1416873600 1417392000
On Sale: Up to 30% Off Sale!
BT1
BT1 BT1_1 BT1_2 Play Battery Tray 1965-1966 Video 1

Product Description

Battery Tray for 1965-1966 Mustangs.

Most battery trays need replacing due to prolonged exposure to acids and other elements. Check to see if your current battery tray needs replacing before installing a new battery. This tray is made from stamped steel and is a bolt in installation.

Be sure to check your battery apron located under your battery tray before you order replacement parts. In most cases battery acid will rust out the battery tray first and can potentially rust out the battery apron too. We do have a battery apron repair kit that includes the correct style group-24 battery tray, a brand new hold down clamp, and all the hardware for the clamp as well.

Similar Mustang Parts

similar mustang parts More Mustang Batteries  

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a Review
Very pleased
Great replacement for my `66. Very good fit and quality. My battery area is like new again!
Florida Chris September 22, 2014
Some line up problems
Had an issue getting the holes to line up perfectly. It needed a little tweaking, but I got it to fit. That said, it was quite an improvement over the piece of wood that my Mustang's previous owner had sitting on the old corroded out battery tray. It was a good buy.
Tony August 13, 2014
Great Item
Really good quality item. The oem original was a bit rusty and corroded being 50 years old. This new one mounted in it's place with no issues. A very strong quality product that seemed to match OEM quite well for an import.
Marty August 12, 2014
great product for the money.
Good for a daily driver. Very inexpensive and it works. I will repaint
Leroy August 2, 2014
Does what it should
This is a great and inexpensive battery tray. I would recommend repainting it, as the paint it came with wasn't great. All of the holes lined up well. The hardest parts was trying to remove my old battery tray! It was rusted to bad, I had to saw all of the original bolts off. Which reminds me, buy new bolts to go along with this if your old ones are trashed.
Nicholas May 12, 2014
Some what rough, paint is blisting, will need to repainted before installed, not the nices place of work.
June 29, 2011
A little rough around the edges
Inexpensive but a bit roughly made. I needed to file the sharp and jagged edges off of mine. Better than the acid eaten original though!
B Payne April 9, 2011
7 Results

Product Video

By Bill Tumas: We're here with our battery apron repair kit for your '64 through '66 Mustang Coupe, Convertible, or Fastback. Our kit comes with everything needed to replace that often rusted area on your early Mustang. The kit includes the correct style group-24 battery tray, a brand new hold down clamp, and all the hardware for the clamp as well.

The battery apron comes ready to weld on. It's predrilled for all of the additional accessories, as well as including hardware, pre-drilled holes for your fender mounting brackets, your battery terminal rubber shield, starter solenoid, precut hole for your wiring harness, and pre-drilled for the battery tray mounting hardware.

Here you can see our battery apron installed on a 1965 Mustang Coupe. You can see it welds to the side of the shock tower, top of the frame rail down here, and welds into your radio support in the front. The battery tray is going to mount right here in the front corner.

Because of battery acid, many times the battery tray is going to rust out first. It's a good opportunity to remove the battery tray and check your apron before you order replacement parts.