Battery Tray Mounting Kit 1965-1970

CJ's Part Number: HW244
CJ's Low Price:
1454716800 19412
Earn 6 RPM Points What's this?
Battery Tray Mounting Kit 1965-1970
Battery Tray Mounting Kit 1965-1970 Battery Tray Mounting Kit 1965-1970 Play Battery Tray Mounting Kit 1965-1970 Video 1

Product Description

Battery Tray Mounting Kit for 1965-1970 Mustangs.

When it comes time to replace that old rusted battery tray, make sure you have the correct hardware to mount it properly. This kit of hardware is all you need for a proper installation of the battery tray.

The kit comes with eight total pieces, 4 bolts, 2 u-nuts, and 2 nuts.

Similar Mustang Parts

similar Mustang parts More Battery Trays & Hold Downs  

Installation Instructions


Difficulty: Easy

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a review
Battery Tray Mounting Kit 1965-1970 is rated 3.75 out of 5 by 4.
Rated 3 out of 5 by from Battery Tray Hardware I bought this on the night of the 14th and they showed up at my door on the 16th. So the shipping was fast. Hardware is very well made and the job was easy to complete. However. The two lower bolts for the battery tray support were to short to fit between the fender wall and through the baskets. I had to use my two original upper battery tray bolts instead. The others worked very well. Maybe these would have fit the car when new but if there is any age (i.e a day after it was manufactured) just be aware that the two lower ones will be about 1/4 inch to 1/2 inch to short. But they are nice bolts and the two that are short can be used else wheres. So no hardware unused. Thanks CJ Pony for the lighting fast shipping.
Date published: 2015-12-17
Rated 2 out of 5 by from Bolts not long enough After installing a new inner fender, the bolts provided were not long enoughto reach the J-clips on the battery tray. It may just be my experience due to the new inner fender, but could be a problem for others doing the same repair.
Date published: 2015-06-10
Rated 5 out of 5 by from battery tray hardware I bought this to install my new apron and battery tray on my 69 Mustang
Date published: 2015-06-20
Rated 5 out of 5 by from Nice item I bought this a mounth ago and i like it ..........
Date published: 2015-11-07
  • 2016-02-06T09:31CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.6
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_en_US, sid_HW244, PRD, sort_relevancy
  • clientName_cjponyparts

Product Questions


You Might Also Like

Product Video

Battery Tray Mounting Kit 1965-1970 Video Transcript
By Bill Tumas: We're here with our battery apron repair kit for your '64 through '66 Mustang Coupe, Convertible, or Fastback. Our kit comes with everything needed to replace that often rusted area on your early Mustang. The kit includes the correct style group-24 battery tray, a brand new hold down clamp, and all the hardware for the clamp as well.

The battery apron comes ready to weld on. It's predrilled for all of the additional accessories, as well as including hardware, pre-drilled holes for your fender mounting brackets, your battery terminal rubber shield, starter solenoid, precut hole for your wiring harness, and pre-drilled for the battery tray mounting hardware.

Here you can see our battery apron installed on a 1965 Mustang Coupe. You can see it welds to the side of the shock tower, top of the frame rail down here, and welds into your radio support in the front. The battery tray is going to mount right here in the front corner.

Because of battery acid, many times the battery tray is going to rust out first. It's a good opportunity to remove the battery tray and check your apron before you order replacement parts.