BBK Long Tube Headers 1-3/4" Chrome GT 2011-2017

BBK: 1633
MSRP: $629.99
CJ's Low Price:
1490400000 16816
Earn 549 RPM Points What's this?
BBK Long Tube Headers 1-3/4" Chrome GT 2011-2017

Product Description

BBK Chrome 1-3/4" Long Tube Headers for all 2011, 2012, 2013, 2014, 2015, 2016 and 2017 GT Mustangs.

BBK R&D department developed these headers (P/N: 1633) with one thing in mind - Getting even more horsepower and torque out of the all-new 5.0 liter Mustang that is already putting out nearly twice the horsepower of its 5.0 predecessor!

This all new rugged BBK header design is constructed with 1-3/4" CNC Mandrel-Bent tubing and solid 3/8" laser cut exhaust flanges. Initial testing is showing gains of around 30+ horsepower with the high flow catted X pipe - and BBK will have an off road version available for even more horsepower gains. Features a full chrome finish.

All headers include a set of new gaskets, required hardware and detailed installation instructions for installation.

Manufacturer Part Number: 1633

*Ford changed the thread pitch on the header bolts midway through productions. 5.0L Mustangs made from March 2010-August 2010 require fine thread header bolts, 5.0L Mustangs made after August 2010 require coarse thread bolts. BBK includes bolts for either application. It is VERY important to make sure that you use the correct bolts, serious damage can be caused by using the wrong bolts.

Tech Tip: All 2015-2017 GT Mustangs will require either P/N: EX1816 or P/N: EX18160 for installation.

Please Note: These headers are NOT compatible with RHD (Right-Hand-Drive) Models.

Order the BBK Chrome 1-3/4" Long Tube Headers for your 2011, 2012, 2013, 2014, 2015, 2016 or 2017 Mustang GT from CJ Pony Parts today!


Similar Mustang Parts

similar Mustang parts More Long Tube Headers  

Mustang Applications

This product will fit the following Mustang years:

Product Reviews

Write a review
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 212.67ms
  • bvseo-msg: HTTP status code of 404 was returned;

Product Questions

Would you be able to intall this to factory with out getting the o2 extensions and without getting the midpipe? Is it going to fit?

Asked by: ChrisZ
No, you would need the extensions and mid-pipe to fit properly.
Answered by: CJPP Dave
Date published: 2017-02-10

Does this part include the o2 sensors?

Asked by: Dnvn1996
It does not, you have to reuse your existing sensors.
Answered by: rk cjpp
Date published: 2016-11-01
  • y_2017, m_3, d_21, h_3CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_en_US, sid_HDBBL20, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 9.45ms

You Might Also Like