Pair of Blowfish Racing Front Brake Cooling Backing Plates for all 2010, 2011, 2012, 2013 and 2014 Mustangs with 14" Brembo Front Brakes.
If the brake fade from the Brembo brakes on your 2010-2014 Mustang is just a bit too much, then picking up a pair of Blowfish Racing’s Front Brake Cooling Backing Plates would be a step in the right direction for improved braking performance.
Features and Benefits:
- Pair Includes Driver and Passenger Side Backing Plates
- Helps Reduce Brake Fade by Directing Cool Air to the Front Brakes
- Drastically Reduces Front Brake Temperature
- Backing Plates Direct All Cool Air to Rotor Hat
- Does Not Require Any Permanent Modifications
- Includes Mounting Hardware
Brake fade is an inherent problem when it comes to most street-legal cars on the track due to the fact that not enough cool air gets through the front fascia and to the brakes to cool them down. You feel this most when you're doing hot laps at the track and by turn 6 or 7 at 75-100+ MPH you have to stomp on the brakes quite a bit harder than you did on the first turn. This is because the surface temperature of your brake rotors has heated up to the point that the friction created by your brake pads isn't as effective in slowing your Mustang down. Picking up a set of these front brake cooling backing plates from Blowfish Racing would be the first step in helping reduce the problematic brake fade in your Mustang.
These cooling backing plates by Blowfish Racing easily bolt in place of your current brake dust shields. In order to work properly, these backing plates require 3” duct hosing (sold separately) to run from the front bumper and the correct front fascia. For 2010-2012 Mustangs, a CS/Boss 302 Front Lower Fascia without fog lights is required to properly connect the hosing. For 2013-2014 Mustangs, in addition to the duct hosing, a bezel plate set is required to complete the cooling system as well.
CJ Pony Parts also offers Blowfish Racing’s complete brake cooling duct kit (BDK7) to get your front brakes nice and cool on the race track.
Ford offers the Brembo package with the GT, Boss and GT500 Mustang because there are a number of enthusiasts who enjoy pushing their Mustang to its limit. For those Mustang drivers who do, and demand more out of their vehicle, picking up these cooling backing plates by Blowfish Racing would drastically reduce brake fade.
*Designed for 14” Brembo front brakes only.
*Does not include 3” duct hosing and is sold separately.
Take your Mustang to the next level with a pair of Blowfish Racing Front Brake Cooling Backing Plates for your 2010, 2011, 2012, 2013 or 2014 Mustang with 14" Brembo Front Brakes from CJ Pony Parts today!
Product ReviewsWrite a review
You Might Also Like
CJ's Low Price:$189.99
CJ's Low Price:$89.99
CJ's Low Price:$92.99
CJ's Low Price:$250.99