Blowfish Racing Brake Cooling Duct Kit Front Brembo 2010-2014

Blowfish Racing: BCD-01-000
MSRP: $254.19
CJ's Low Price:
$189.99
1480723200 52093
Earn 189 RPM Points What's this?
Blowfish Racing Brake Cooling Duct Kit Front Brembo 2010-2014
Blowfish Racing Brake Cooling Duct Kit Front Brembo 2010-2014 Blowfish Racing Brake Cooling Duct Kit Front Brembo 2010-2014
Blowfish Racing

Product Description

Blowfish Racing Front Brake Cooling Duct Kit for all 2010, 2011, 2012, 2013 and 2014 Mustangs with 14" Brembo Front Brakes.

The factory Brembo brakes on your 2010-2014 Mustang definitely have a lot of stopping power, but when you're running your pony hard, the brake fade can sometimes be excessive. That's where the Blowfish Racing Front Brake Cooling Duct Kit comes in and drastically improves your Mustang's braking performance.

Complete Kit Includes:
- (2) Driver and Passenger Side Brake Backing Plates
- (2) Thermoid 3" x 42" Cooling Duct Hoses
- All Necessary Mounting Hardware

The duct hosing included in this kit is stable up to 550F and allows air to enter through the front lower fascia, and routes it directly to the front brakes via the cooling backing plates. These cooling backing plates easily bolt in place of your current brake dust shields. The hoses are pre-cut with finished ends and are designed with reinforced wiring for increased rigidity. The reinforced wiring is removed on the last 2” of either side of the hoses for easy installation.

Features and Benefits:
- Specifically Designed for the 14" Front Brembo Brakes on the GT, Boss & GT500
- Drastically Reduces Front Brake Temperature
- Backing Plates Direct All Cool Air to Rotor Hat
- Helps Reduce Brake Fade by Directing Cool Air to the Front Brakes
- Does Not Require Any Permanent Modifications
- Includes Mounting Hardware For Easy Installation

Brake fade is an inherent problem when it comes to most street-legal cars on the track due to the fact that not enough cool air gets through the front fascia and to the brakes to cool them down. You feel this most when you're doing hot laps at the track and by turn 6 or 7 at 75-100+ MPH you have to stomp on the brakes quite a bit harder than you did on the first turn. This is because the surface temperature of your brake rotors has heated up to the point that the friction created by your brake pads isn't as effective in slowing your Mustang down. Picking up this complete kit by Blowfish Racing would be an all-in-one solution to drastically reducing the brake fade on your Mustang.

Ford offers the Brembo package with the GT, Boss and GT500 Mustang because there are a number of enthusiasts who enjoy pushing their Mustang to the limit. For those Mustang drivers who do, and demand more out of their vehicle, picking up this complete kit by Blowfish Racing would completely change the feel of their pony's braking performance.

*Designed for 14” Brembo front brakes only.
*Complete kit on 2010-2012 Mustangs when used with CS/Boss 302 front lower fascia.
*Requires fog light bezels and Blowfish Racing brake cooling duct bezel plates on 2013-2014 Mustangs.

Take your Mustang to the next level with the Blowfish Racing Front Brake Cooling Duct Kit for your 2010, 2011, 2012, 2013 or 2014 Mustang with 14" Brembo Front Brakes from CJ Pony Parts today!

Similar Mustang Parts

similar Mustang parts More Brake Hoses & Lines  

Installation Instructions

Mustang Installation

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a review
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 97.48ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

Product Questions

  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 406.53ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: HTTP status code of 403 was returned;

You Might Also Like