BMR Adjustable Tubular Front Lower Control Arms with Tall Ball Joints for 2005-2009 Mustangs.BMR tubular A-arms are a lightweight alternative to your factory stamped steel arms. BMR offers them in two styles, standard and adjustable. Both models feature CNC machined rear pivot points, heavy duty 1.25" DOM tubing, and new TALL ball joints sourced from an OEM supplier. These A-arms are also compatible with your OE K-member or a BMR K-member.
These control arms with the taller ball joint are recommended for lowered cars. The taller ball joint improves suspension geometry on lowered Mustangs by raising the spindle relative to the balljoint pivot-point. This raises the roll center back into the correct range for optimum handling, resulting in reduced body roll, quicker steering response and improved overall front tire grip.
NOTE: The adjustable version is recommended for drag race or road race applications due to the elevated noise transmission from spherical rod ends and Delrin bushings. Assembled with a large 3/4" QA1 XR series Teflon lined rod end on the main tube and an internally greased Delrin bushing on the rear, this version allows camber and caster adjustment not possible with OE arms. Adjustable version provides enough adjustment for up to 1.125" overall narrower track width (9/16" per side). 9.6 lbs. lighter than stock.
Product ReviewsWrite a review
You Might Also Like
CJ's Low Price:$589.95
CJ's Low Price:$499.95
CJ's Low Price:$104.95
CJ's Low Price:$179.95