Pair of BMR Rear Lower Control Arm Relocation Brackets for all 2005-2014 Mustangs.A vehicles "Instant Center" determines it's ability to transfer weight properly upon acceleration. The angle of the upper and lower control arms produces an intersect point that initiates this weight transfer. With fixed control arm mounting points, it is not possible to tune this instant center position in the chassis.
These control arm relocation brackets provide additional rear mounting holes that allow you to alter the instant center by varying the control arm angles. This mod is recommended for any type of racing and should also be performed if the vehicle is lowered to correct the rear suspension geometry. Mounting hardware included.
Available in a durable black hammertone or red powdercoat finish.
Please Note: It is necessary to weld the brackets in place if the vehicle will be drag raced.
*These brackets, in conjunction with BMR tubular control arms, have produced 1.33 second, 60 foot times on the strip!
Product ReviewsWrite a review
BMR Rear Lower Control Arm Relocation Bracket Black Pair 2005-2014 is rated out of 5 by 3.
Rated 5 out of 5 by Trackpack_gt from Worked great! Make sure you have both a 22mm and a deep 22mm sockets and a 22mm open end wrench and the install will go smoothly. They helped my relatively stock 2011 GT run 12.4 at the track!
Date published: 2015-09-25
Rated 5 out of 5 by PierreM from launch like a bullet great product top quality no more wheels-hop especially with lowered vehicle , launch much harder lot of gripe and quicker at 0 to 60
Date published: 2015-02-17
Rated 4 out of 5 by silvr5ho from relocation brackets the relocation brackets were great they sent the wrong bolts 12 mm and that need to be 14 mm
Date published: 2015-05-23
You Might Also Like
CJ's Low Price:$119.95
CJ's Low Price:$259.95
CJ's Low Price:$219.95
CJ's Low Price:$279.95