BMR Rear Upper Control Arm with Poly Bushings for all 2011-2014 Mustangs.The single upper control arm is responsible for maintaining pinion angle and preventing axle counter-rotation. This "3 link" style suspension is ideal for autocross and road race applications as it allows the most articulation possible with a solid axle.
For drag racing, however, the single, centered link becomes a weak point as the arm is only one inch thick in the middle and made from light gauge, stamped steel. BMR's upper control arm is made from 1 5/8" x .120 wall DOM tube and is MIG welded, creating a structurally superior third link.
BMR has incorporated an application-specific, dual-durometer bushing. This 4-piece bushing utilizes a high-durometer center bushing to resist deflection under heavy loading and two outer, low-durometer bushings to allow articulation during handling. This makes the control arm equally at home on the drag strip, street, or road course.
Made in the USA.
Similar Mustang PartsMore Rear Control Arms
Product ReviewsWrite a review
Can this be used on lowered vehicles or should the adjustable one be used?
It will work on a lowered vehicle.
Date published: 2015-09-28
will this control wheel hop on 2012 gt
Yes, this would help with wheel hop on your 2012 GT. However, lower control arms are a more common fix for wheel hop.
Date published: 2015-02-23
You Might Also Like
CJ's Low Price:$174.95
CJ's Low Price:$144.95