Body Panel Seam Sealer for Mustangs.Ideal for drip moldings, floor pan seams, interior trunk welds, exterior body seam welds and many other body seam areas. For use as a water and dust seal on exterior and interior body surfaces. New improved formula allows for a longer open time so it can be tooled for several minutes after being applied. Cures to a firm abrasion resistant seal with no cracks or peeling.
Can be air dried or force dried and then painted within 30 minutes. Stands up on vertical surfaces and won't crack even in large seams. Possesses excellent flexibility properties so it will not harden or become brittle.
Excess sealer and smears can be cleaned up with a suitable solvent before sealer dries. Sealer surface accepts all paints and must be painted. Shelf life is 6 months.
Similar Mustang PartsMore Mustang Adhesives & Misc. Chemicals
This sealer works well but you have got to be quick getting it where you want it. It starts to skin almost immediately and sometimes wont stick if you move to slow and just kind of slides along hanging off of the tip until it catches again. it gets easier once you realize what its doing and speed up laying the bead. It dries hard overnight but you can still leave an imprint with your fingernail if you push real hard. Sprayed over it with rattle can primer and it looks alright. Does what its supposed to do.
You Might Also Like
CJ's Low Price:$21.99