Set of Borgeson Braided Stainless Steel Power Steering Hoses for 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972 and 1973 Mustangs with a Fox Body Power Steering Rack and Pinion Conversion and a Saginaw Power Steering Pump.
Are you installing an aftermarket suspension kit that uses a Fox Body rack and pinion on your 1965-1973 Mustang? This braided stainless steel hose set is designed to be used with 1965-1973 Mustangs. The Saginaw power steering pump is styled after the GM power steering pump which fits all 1965-1973 V8 Mustangs. These braided stainless steel hoses are complete with a pressure hose and a return hose.
- Pressure Hose
- Return Hose
- 90 Degree Fittings (3)
- Constructed out of Braided Stainless Steel
- Fits 1965-1973 Mustangs
The stainless steel hoses have the correct 90 degree fittings that get mounted to the Fox body power steering rack and pinion. The pressure hose has a fitting on the other end that gets installed to the Saginaw power steering pump. The return hose has a stainless steel end that slips over the nipple on the pump which gets tightened with the supplied hose clamp. This is a great upgrade for the Mustang owner that has converted to a Saginaw power steering pump and an aftermarket suspension that uses a Fox Body rack and pinion.
It’s common that when the power steering hoses heat up, it expands the stock rubber hose to a point where the fluid cannot properly return. This is an upgrade for the Mustang owner that wants more of the performance aspect of braided stainless steel lines.
The steering on your classic or late model Mustang contains many vital components for keeping your Mustang on the road. If one of these components should break, or you want to perform an upgrade to add some higher quality insurance for the future, the steering components from Borgeson should be at the top of your list. CJ Pony Parts stocks dozens of parts from Borgeson for your Mustang-order today!
Purchase a new Set of Borgeson Rubber Power Steering Braided Stainless Steel for 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972 and 1973 Mustangs with a Fox Body Power Steering Rack and Pinion Conversion and a Saginaw Power Steering Pump from CJ Pony Parts today!
Product ReviewsWrite a review
does this work with the TCP power rack?
Would it be possible to get hose in triple the length as I wish to fit this to A Right hand drive . Aussie built Ford Falcon. Using a Saginaw GM pump and traditional style worm gear pitman arm steering box . same as 70mustang but the right side
You Might Also Like
CJ's Low Price:$16.99
CJ's Low Price:$946.99