Borgeson Steering Box Coupler for all 1968, 1969 and 1970 Mustangs with a Borgeson Power Steering Conversion Box.This coupler is designed exclusively for use with Borgeson power steering conversion boxes(SB19). This is an OEM style half rag joint steering coupler. This Borgeson Steering Box Coupler for all 1968, 1969 and 1970 Mustangs with a Borgeson Power Steering Conversion Box is designated for the steering box side and has a rubber disc attached with hardware. This coupler will fit an 11/16 Inch-36 spline steering column shaft in all 1968-1970 Mustangs and last much longer than the joint that came stock from the factory.
Whether you're replacing a worn or damaged shaft coupler, or setting up a custom steering system on your street or race car, Borgeson has all your needs covered. This Borgeson steering shaft coupler can be used to extend the steering box, the RP shaft or the column shaft. Borgeson steering shaft couplers can be welded and or pinned to the un-splined end of the shaft. This coupler will connect the steering wheel to the steering gear input shaft at the steering gear end and reduce play in the steering wheel. This durable rag joint will significantly increase the control and smooth the feel of the steering in all 1968, 1969 and 1970 Mustangs.
The steering on your classic or late model Mustang contains many vital components for keeping your Mustang on the road. If one of these components should break, or you want to perform an upgrade and add some higher quality performance, the reliable steering components from Borgeson should be at the top of your list. CJ Pony Parts stocks dozens of parts from Borgeson you can get for your Mustang today!
Similar Mustang PartsMore Mustang Power Steering Conversion Kits
You Might Also Like
Regular Price: $105.99
Special Price $95.39
CJ's Low Price:$817.99
CJ's Low Price:$946.99