Borla Stainless Steel 2-1/2" Dual Exhaust System for 1967 GT500s.Update your classic 1967 GT500 with a new exhaust system from Borla. To really hear the 428 in all its glory, an upgraded exhaust is needed. Borla created the perfect bolt-on exhaust system to free up horsepower and improve sound. This dual exhaust system bolts to the factory exhaust manifolds, runs the length of the vehicle and exits through the rear valance cut outs. You can make the exhaust kit work with long tubes if you don't use the head pipes. Performance is improved with mandrel bent stainless steel tubing, an x-pipe and turbo style mufflers. Minimal restrictions increase exhaust flow to help the 428 expel exhaust gases faster and more efficiently. Dual 3" polished, rolled, angle-cut tips exit through the rear valance cut-outs.
- Driver side down pipe assembly
- Passenger side down pipe assembly
- X-pipe assembly
- Driver side muffler assembly
- Passenger side muffler assembly
- Driver side tail pipe assembly
- Passenger side tail pipe assembly
- Six stainless steel Accuseal clamps
- Four hex nuts
- Four lock washers
- Four flat washers
- Four hex screws
Borla's high quality exhaust features a natural stainless steel finish that will last the life of your Mustang. Exhaust tips are polished and will fit perfectly with the chrome accents on the back of your Mustang. A vintage GT500 deserves only the best and that's exactly what Borla manufacturers. Equip your Mustang with a durable, high quality, performance improving exhaust system that will make your GT500 sound better than any other car on the road.
Similar Mustang PartsMore Dual Exhaust Kits
This product will fit the following Mustang years:
Product ReviewsWrite a review
I am looking for a dual exhaust system Stainless that fits a 63 ford thunderbird 390 engine.. do you have this kit
I have a couple of questions: First, which muffler type comes in this system, i.e. touring, other? Second, does it come with hangers or will the stock 67 hangers for a dual exhaust work with this system for mounting in the original location?
Hi, excuse me this system fits on a 427 stroker small block 351? or just for the 427 big block?
You Might Also Like
Regular Price: $375.99
Special Price: $357.19
All Borla exhaust systems are made of high-quality aircraft grade stainless steel, including the Mandrel-bent pipes and these polish rolled stainless steel tips that come pretty well to the muffler making for a much easier installation. All of these systems are backed by a million-mile warranty.
Like I said before, Borla offers three different mufflers with their system. Shown here, is the Borla Touring muffler to provide performance without excessive sound. This will have a low growl to it and have no drone whatsoever on the highway.
In the middle of the sound spectrum, there's going to be the Borla S-type. The S-type's going to be again, a high-performance muffler with no drone on the highway, and have a much more aggressive sound than the touring muffler, but still be perfectly livable for daily driving. This is the Borla ATAK, the most aggressive sounding street muffler the Borla offers. ATAK stands for acoustically tunes applied kinetics. What that basically means is this muffler is specifically designed around the engineer or vehicle to have that aggressive sound, yet still provide no drone on highway speeds.
Not only does Borla engineer their mufflers to sound good, they engineer their systems to fit your vehicle properly, making for a much easier installation. Whether you're looking for the mild sound of the Borla GTouring or the aggressive sound of the ATAK, Borla has the perfect exhaust system for your Ford vehicle.