Cardone Select New Aluminum Water Pump without a Backing Plate and with an Alternator and Casting for all 1965, 1966, 1967 and 1968 Mustangs with a 289 Engine.
Make sure you get the proper water flow in your 1965-1968 Mustang by Purchasing this New Aluminum Water Pump without a Backing Plate and with an Alternator and Casting from Cardone Select. Designed to be used specifically with a 289 engine, this pump does not come with a backing plate however it will ensure a fantastic & smooth cooling performance out of your Mustang.
Features & Benefits:
- Original Casting Specifications
- Provides Proper Water Flow for Best Cooling Performance
- Bearings are Sealed & Lubricated for Smooth Performance
- Eliminates Excessive Bearing Load & Noise
- Includes High-Quality Mounting Gasket
- Tested to Ensure Maximum Performance & Long Lasting Durability
- Easy Installation
Cardone Select uses to well-known technology to ensure that brand new water pump is designed to the original casting specifications to your Mustang can get the proper water flow, allowing you to enjoy a maximum cooling performance. This will also assure that the pump will properly fit into your classic Mustang for an easy installation. The bearings are made of heat-treated carbon or carburized steel that are sealed & lubricated for a more smooth performance throughout the life of the pump. Any excessive bearing load or noises are wiped away from hubs & impellers that are precisely perpendicular to the bearing shaft.
When you make this purchase, Cardone Select makes sure to supply a high-quality mounting gaskets for a leak-proof seal on the mounting surface while other seals are utilized to make sure you get a trouble-free, long-lasting performance from this water pump. Cardone also tests each pump to ensure the maximum performance and long-term reliability on your vintage Pony.
Please Note: This water pump is NOT to be used with a generator.
*If you are looking for a water pump that has a backing plate, check out part # WP47.
Some of the mechanical parts in your classic Mustang will break over the time you own it. It's almost a given. You'll want to replace them with the highest quality you can find, so the new part will last longer and serve your Mustang better. If you're hunting for one of these parts for your Mustang, check out the large selection of Cardone Select parts that CJ Pony Parts has to offer.
Purchase this Cardone Select New Aluminum Water Pump without a Backing Plate and with an Alternator and Casting for your 1965, 1966, 1967 or 1968 Mustang with a 289 Engine from CJ Pony Parts today!
Product ReviewsWrite a review
Hi, on my mustang 289 V8 (1966) the number 38026-1 is writed on the water pump, is't corresponding of the Model Cardone Select Water Pump Without Backing Plate With Alternator And Casting Aluminum New 289 1965-1968 or Not?
Will this pump fit a Mustang with a V8 289 4v built in February 1965?
Will this work on my 1968 mustang 302 and is the backing plate important,also will this be a correct fit just like a stock one,Thank you,Carl..
You Might Also Like
CJ's Low Price:$44.99
CJ's Low Price:$29.99
CJ's Low Price:$31.99
CJ's Low Price:$26.97