Ford Racing Engine Block Cast Iron 5.4L

Ford Racing: M-6010-M54
MSRP: $1299.00
CJ's Low Price:
1454889600 23830
Earn 1189 RPM Points What's this?
Ford Racing Engine Block Cast Iron 5.4L
Ford Racing

Product Description

Ford Racing Cast Iron 5.4L Engine Block for Ford Mustangs.

Newer casting design features lower-end improvements to minimize noise, vibration, and harshness. Windsor-style main cap locators. 90.2mm bore size.

Similar Mustang Parts

similar Mustang parts More Engine  

Installation Instructions

Mustang Installation

Product Reviews

Write a review

Product Questions


would this motor be able to fit in a 98 base model?

Asked by: stang485
This is just the engine block without the internals, it would physically fit but may require modification or replacement of supporting components.
Answered by: rk cjpp
Date published: 2016-01-14

Will this fit a 1965 mustang and if it does what transmission would you recommend to go with it? 

Asked by: CHOCO
You could virtually put this engine in anything and with the correct bell housing or adapter plates you could use whatever transmission you would like. All of this depends on how experienced you are with fabrication and what kind of budget you plan on having for your build.
Answered by: CJPP Dave
Date published: 2016-01-26

will this fit in a 2007 v6 mustang

Asked by: kraw
Yes, but it would NOT be a direct swap. There is so many other parts you would need and possibly some fabrication.
Answered by: CJPP Dave
Date published: 2015-11-10

Will this block fit on my 2011 GT500?

Asked by: Dave_DW
Yes it will.
Answered by: CJPP Dave
Date published: 2015-11-03

Cubic in? Max hp rating?

Asked by: TonyMercury 427
This is just the engine block, not the engine itself. How you spec it out will determine those ratings.
Answered by: CJ Pony Parts
Date published: 2015-09-24

What is the rating on this block? 

Asked by: garza2n4
Not sure what your asking.
Answered by: CJ Pony Parts
Date published: 2015-09-04

hello, i have a 1996 cobra, does this block fit in it? Can i use all other parts of my cobra to make it function? Or do I need more parts to make it run? greetings mark

Asked by: merco
It will probably fit. It might be a little tight when you get all of the other internals installed. Some of them might be able to be reused from your Cobra, but most likely, most things will need replaced.
Answered by: CJ Pony Parts
Date published: 2015-08-25

Can you use 3v heads on these or is it just 2v & 4v

Asked by: Gaspedal
  • 2016-02-08T09:06CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.6
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_9
  • loc_en_US, sid_M6010M54, PRD, sort_recentAnswersFirst
  • clientName_cjponyparts

You Might Also Like