Cervini Gotta Have It Green Fiberglass 1995 Cobra R Style Hood for all 2013-2014 V6 and GT Mustangs, all 2013 Boss 302 Mustangs and all 2010, 2011, 2012, 2013 and 2014 Shelby GT500s.
This 1995 Cobra R style hood is constructed from premium hand-laid fiberglass with screened air vents on the rear of the hood to extract underhood heat. A fully finished underside liner adds extra strength and can be painted for a show quality appearance. Cervini's premium fiberglass hoods arrive with a guaranteed perfect fit and finish in all 2013-2014 V6, GT, and Boss 302 Mustangs and all 2010, 2011, 2012, 2013 and 2014 Shelby GT500s.
The Mustang Cobra R was and still is considered one of the finest creations of Ford’s Special Vehicle Team (SVT). A fully race-ready track monster, the original Cobra R was launched in 1995, and was so hardcore that it even shunned such creature comforts as air conditioning and a stereo (of course, you could add them back if you wanted). In 2000, an updated version was launched, and both cars used highly tuned versions of Ford’s small-block eight-cylinder, which made the signature Cobra R hood a necessity due to displacement increases of 1.2 liters and .8 liters, respectively.
This new hood installs at all factory mounting locations and still utilizes the factory hood latching system. New windshield washer nozzles are included and have been relocated to the underside of the hood. The unpainted hood will require prepping, priming and painting prior to installation. Downloadable instructions for most Cervini parts, including these Cobra R hoods, are available directly from their website. Just find the hood that fits your car and visit the ‘instructions’ tab to download the latest version of the product documentation and ensure a painless install.
- Deep Impact Blue
- Gotta Have It Green
- Grabber Blue
- Ingot Silver
- Oxford White
- Performance White
- Race Red
- Red Candy Metallic
- Ruby Red Metallic
- School Bus Yellow
- Sterling Gray
Cervini hoods are painted when ordered. Delivery of painted hoods will take 4-6 weeks to deliver.
The timeless 1995 Cobra R look is now available for any 2013-2014 V6, GT or Boss Mustang or any 2010-2014 Shelby GT500. Cervini's Cobra R hood will not only provide race-inspired styling, but also afford additional clearance for the aftermarket engine modifications you may have made. This Cobra R hood will easily fit large superchargers such as the 3.6L Kenne Bell and the 3.4L Whipple without any clearance issues, with the highest point of the hood being 3" above the factory hood height.
Striving for Perfection
Cervini strives for perfection and is widely known for producing the best quality fiberglass and urethane parts in the industry. Founder Danny Cervini started the company in 1991 building custom parts like hoods, fender flares, side skirts and front and rear airdams for the Ford Mustang. It wasn’t long until the business expanded to tackle Ford’s popular truck line, producing a similar selection of body accessories for the F-150.
Fifteen years after launching the business in 2006, Cervini Auto Designs, the company’s headquarters and turn-key Mustang conversion facility, officially opened for business. Even though Cervini’s operation is much larger now than it once was, their commitment to quality hasn’t changed. All Cervini parts are made in the USA using materials purchased domestically: a point of pride for these specialists in American automobiles.
Danny and company have watched the Ford Mustang transform quite a bit since their humble beginnings in the early 90’s. From the third-generation Fox body cars, to the SN-95 platform that inspires the factory-accurate Mustang Cobra R hoods Cervini offers today: a timeless design so well penned that it even looks at home on later model cars. With the Mustang legacy stronger than ever, it’s likely we’ll see this look continue to find a home even on as-yet unreleased variations of the world’s favorite pony car.
Will the good people at Ford take things a step further and grace us with yet another track-ready variant of the Cobra R? With the recent resurgence in the use of the famed Shelby GT350 and Shelby GT500 special editions, it’s not likely we’re going to see another Cobra R soon — all the more reason to pay tribute to this extremely rare example of the blue oval company at their best.
Order a Cervini Fiberglass 1995 Cobra R Style Hood for your 2013-2014 V6 or GT Mustang, 2013 Boss 302 Mustang or 2010, 2011, 2012, 2013 or 2014 Shelby GT500 from CJ Pony Parts today!
Product ReviewsWrite a review
You Might Also Like
From:CJ's Low Price:$629.99
CJ's Low Price:$669.99
CJ's Low Price:$89.99