Classic Tube Choke Tube Set V8 1965-1966/2V 289/302 1967-1973

CJ's Part Number: MUK1001-V
From:
CJ's Low Price:
$27.99
1475020800 44100
Earn 27 RPM Points What's this?
Classic Tube Choke Tube Set V8 1965-1966/2V 289/302 1967-1973
Classic Tube Choke Tube Set V8 1965-1966/2V 289/302 1967-1973 Classic Tube Choke Tube Set V8 1965-1966/2V 289/302 1967-1973 Classic Tube Choke Tube Set V8 1965-1966/2V 289/302 1967-1973 Classic Tube Choke Tube Set V8 1965-1966/2V 289/302 1967-1973
Classic Tube

Product Description

Set of Classic Tube Choke Tubes for all 1965-1966 Mustangs with a V8 Engine and 1967, 1968, 1969, 1970, 1971, 1972 and 1973 Mustangs with a 2-Barrel Carbureted 289 or 302 V8 Engine.

You want to be confident you'll get a reliable, consistent start in your Mustang every time you turn the key. Among other parts, the choke tube contributes to a steady, rich fuel combustion and even, uniform starts. Old, corroded or missing choke tubes can cause problems starting your car as well as inhibit your car from running rich and full.

This set of Classic Tube Choke Tubes for all 1965-1966 Mustangs with a V8 Engine and all 1967, 1968, 1969, 1970, 1971, 1972 and 1973 Mustangs with a 2-Barrel Carbureted 289 or 302 V8 Engine are available in Original Steel and also Stainless Steel versions. These choke tubes will fit directly in place of the faulty old stock choke tubes and be a steadfast original style replacement that will not only look great, but function more than efficiently as well. These choke tubes run from the passenger side exhaust manifold and directly over in to the carburetor. One tube fits into the top of the manifold and the second tube will fit into the bottom side of the manifold.

So if you still have the original choke tubes installed in your 1965-1966 Mustang with a V8 engine or in any 1967-1973 Mustang with a 2-barrel carbureted 289 or 302 V8 engine, then chances are they are rusted, warped or damaged in some way that they need replacing. This original style replacement set of choke tubes is the perfect part for the job.

There are lots of fluids in your Mustang. From gasoline, engine oil, steering fluid, antifreeze and more, there's lots of liquid moving around your engine bay. Allowing these fluids to do their jobs requires the proper tubing. No one makes more tubes for your Mustang than Classic Tube.

Order a Set of Classic Tube Choke Tubes for your 1965-1966 Mustang with a V8 Engine or 1967, 1968, 1969, 1970, 1971, 1972 or 1973 Mustang with a 2-Barrel Carbureted 289 or 302 V8 Engine from CJ Pony Parts today!

Similar Mustang Parts

similar Mustang parts More Emission  

Installation Instructions

Mustang Installation

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a review
Classic Tube Choke Tube Set V8 1965-1966/2V 289/302 1967-1973 is rated 5.0 out of 5 by 1.
Rated 5 out of 5 by from Good Quality I put these on and they fit good and were good quality. You may have to bend them a little to make the fit exactly. Haven't put the motor in yet.
Date published: 2015-01-20
  • 2016-09-28T07:40CST
  • bvseo_cps, prod_bvrr, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_MUK1001-V, PRD, sort_relevancy
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.1.0
  • CLOUD, getContent, 167.9ms
  • REVIEWS, PRODUCT

Product Questions

How do I cancel an item on my shopping cart?

Asked by: Babyray2
Hit the red 'x' on the righthand side.
Answered by: CJ Pony Parts
Date published: 2015-09-09

What do these do?Is it heat protection for the cable? If so what cable do I need with them for the Holley 500 cfm? Thanks Dave.

Asked by: StableKeeeper
  • 2016-09-28T08:03CST
  • bvseo_cps, prod_bvqa, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_en_US, sid_MUK1001-V, PRD, sort_recentAnswersFirst
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.1.0
  • CLOUD, getContent, 400.26ms
  • QUESTIONS, PRODUCT

You Might Also Like