Classic Tube Distributor Vacuum Line Original Steel 289 1965-1966

Classic Tube: MUA1003 OE
CJ's Low Price:
$12.99
1481241600 26805
Earn 12 RPM Points What's this?
Classic Tube Distributor Vacuum Line Original Steel 289 1965-1966
Classic Tube Distributor Vacuum Line Original Steel 289 1965-1966 Classic Tube Distributor Vacuum Line Original Steel 289 1965-1966 Classic Tube Distributor Vacuum Line Original Steel 289 1965-1966
Classic Tube

Product Description

Classic Tube Original Steel Distributor Vacuum Line for 1965-1966 Mustangs with a 289 Engine.

While restoring the 289 engine of your classic 1965-1966 Mustang, you may notice the distributor vacuum line damaged or missing altogether. So get it replaced with this Classic Tube Original Steel Distributor Vacuum Line from CJ Pony Parts!

This distributor vacuum line MUA1003 OE comes pre-bent to match the factory line and includes the fittings for an easy and quick installation. This line runs from the distributor vacuum advance to a special port to measure the engine's vacuum and adjust timing as needed. The original steel construction of the fuel line will provide a classic, factory look under the hood of your Mustang.

*Does not work with Holley carburetors.

There are lots of fluids in your Mustang. From gasoline, engine oil, steering fluid, antifreeze and more, there's lots of liquid moving around your engine bay. Allowing these fluids to do their jobs requires the proper tubing. No one makes more tubes for your Mustang than Classic Tube.

Order this Classic Tube MUA1003 OE Original Steel Distributor Vacuum Line for your 1965-1966 Mustang with a 289 Engine from CJ Pony Parts today!

Similar Mustang Parts

similar Mustang parts More Distributors  

Installation Instructions

Mustang Installation

Mustang Applications

This product will fit the following Ford Mustang years:

Product Reviews

Write a review
Classic Tube Distributor Vacuum Line Original Steel 289 1965-1966 is rated 4.0 out of 5 by 1.
Rated 4 out of 5 by from Quality product! I bought this to connect an Autolite 4100 carb to my distributor. It fit up perfectly with the carb, but I had to make some minor tweaks to match it up with my Distributor's vacuum connection. The Stainless stell is nice and thick and made modification easy and smooth using only hand tools.
Date published: 2015-07-24
  • y_2016, m_12, d_7, h_18
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_MUA1003O, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 117.32ms
  • REVIEWS, PRODUCT

Product Questions

  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 130.8ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: HTTP status code of 403 was returned;

You Might Also Like